Scooter Doc
Currently Offline
Mission Tx.
Posts: 344
Likes: 3
Joined: Feb 24, 2013 8:45:49 GMT -6
|
Post by kalee on Jun 6, 2013 11:55:26 GMT -6
rapidjim, I have a 2012 Ice Bear trike pst 150cc-11, would the front coweling be removed the same way as the pictures you have listed in Trikers Alley( topic: Sample Of Manual ) Nov. 1 2010 result #7? I have a bad vibration rattle under the front coweling when I go to take off and I'm thinking it's either around the head lights or something is loose under the front coweling. I would post a picture of my trike but have not had any luck doing that. I have one in photobucket but I'm still unable to transfer it to Scooter Doc. Thank you for your time
kalee
|
|
|
|
Post by Alleyoop on Jun 7, 2013 11:14:05 GMT -6
If your front end looks like the one he took apart yes, they are all pretty much the same.
Alleyoop
|
|
Scooter Doc
Currently Offline
Mission Tx.
Posts: 344
Likes: 3
Joined: Feb 24, 2013 8:45:49 GMT -6
|
Post by kalee on Jun 7, 2013 11:24:02 GMT -6
Yeah it pretty much looks like the one rapidjim took apart, Thanks Allyoop for the info
kalee
|
|
|
|
Post by Alleyoop on Jun 8, 2013 20:43:21 GMT -6
Here is Kalee PST150-11 Trike: Alleyoop   |
|
Scooter Doc
Currently Offline
Mission Tx.
Posts: 344
Likes: 3
Joined: Feb 24, 2013 8:45:49 GMT -6
|
Post by kalee on Jun 8, 2013 20:50:40 GMT -6
I have not removed the front cowl yet, found out if I leave the lid open where the fuel tank is most of the vibration noise is gone.I had purchased a role of black door edge guard to solve a rattle in my storage trunk, so I cut 2 small strips and applied them to the sides of the fuel tank door and almost eliminated most of the rattle.
kalee
|
|
Scooter Doc
Currently Offline
Mission Tx.
Posts: 344
Likes: 3
Joined: Feb 24, 2013 8:45:49 GMT -6
|
Post by kalee on Jun 8, 2013 20:51:44 GMT -6
Man that was quick, Thanks again alleyoop
kalee
|
|
Scooter Doc
Currently Offline
Mission Tx.
Posts: 344
Likes: 3
Joined: Feb 24, 2013 8:45:49 GMT -6
|
Post by kalee on Jun 9, 2013 10:29:30 GMT -6
Alley, Thought you might like to know this trike came with 205/50-10 rear tires brand name is CST. Dont recognize this brand do you?
kalee
|
|
|
|
Post by Alleyoop on Jun 9, 2013 11:11:39 GMT -6
|
|
Scooter Doc
Currently Offline
Mission Tx.
Posts: 344
Likes: 3
Joined: Feb 24, 2013 8:45:49 GMT -6
|
Post by kalee on Jun 9, 2013 15:06:26 GMT -6
Thanks Alley, are these a good tire or not?
kalee
|
|
Scooter Doc
Currently Offline
Mission Tx.
Posts: 344
Likes: 3
Joined: Feb 24, 2013 8:45:49 GMT -6
|
Post by kalee on Jun 15, 2013 10:28:44 GMT -6
Yesterday afternoon I proceeded to remove the front cowl using rapidjims pictures and it went pretty well the way he said it would. All of the bolts and screws I found in the front had never been tightend, so I snugged all of them down and that eliminated the bad vibration rattle altogether. Thanks rapidjim & Alleyoop for the great advice.
kalee
|
|
|
|
Post by Alleyoop on Jun 15, 2013 13:57:58 GMT -6
Yes those are good tires, better than the HARD stuff they used to put on them.
Alleyoop
|
|
Doc's Anything Goes
Currently Offline
Posts: 765
Likes: 28
Joined: Apr 2, 2010 6:37:07 GMT -6
|
Post by rapidjim on Jun 19, 2013 20:20:07 GMT -6
Glad my write up helped you.
Sorry I missed this question earlier and thanks Alley.
Jim
|
|
Scooter Doc
Currently Offline
Mission Tx.
Posts: 344
Likes: 3
Joined: Feb 24, 2013 8:45:49 GMT -6
|
Post by kalee on Jun 22, 2013 20:47:44 GMT -6
rapidjim,,, could you post a break down of how to get to the rear lights on my ice bear pst 150-11?
kalee
|
|
|
|
Post by Alleyoop on Jun 22, 2013 21:18:38 GMT -6
On mine it has a removeable piece on the end of the tub held on by two plastic push on screws. Check if yours has an access panel to get to the taillights. Alleyoop  |
|
Scooter Doc
Currently Offline
Posts: 1,319
Likes: 5
Joined: Feb 17, 2011 19:36:47 GMT -6
|
Post by mike6736 on Jun 23, 2013 8:36:16 GMT -6
|
|
..BAD TO THE BONE..
...
...
...