Clinician
Currently Offline
Posts: 2
Likes: 0
Joined: Jun 11, 2013 9:08:27 GMT -6
|
Post by ontuyou on Jun 11, 2013 9:15:29 GMT -6
I have a 1986 Honda spree. I was told that the battery was new but the electric starter doesn't work. I charged the battery and it reads 12.6 volts when running. The starter spins but won't engage. Help....
|
|
Senior Clinician
Currently Offline
Posts: 167
Likes: 2
Joined: Jun 4, 2011 10:43:50 GMT -6
|
Post by gatekeeper on Jun 11, 2013 18:02:54 GMT -6
|
|
|
|
Post by Alleyoop on Jun 11, 2013 18:33:15 GMT -6
Look on sectionb 8 page 14, that is your bendix that the STARTER TURNS. The bendix then slides out and meshs with the gears on the VARIATOR FAN PLATE to turn the crank to start.
So pull it out and see if the little gears on the STARTER are ok and meshing with the BENDIX.
Also the BENDIS shaft sticking out GOES INTO A SLOT on the inside of the CVT COVER. That Aligns the BENDIX straight and holds it in position.
Alleyoop
|
|
..BAD TO THE BONE..