Scooter Doc
Currently Offline
Posts: 274
Likes: 1
Joined: Aug 25, 2013 21:40:53 GMT -6
|
Post by mikey34 on Dec 23, 2013 11:08:43 GMT -6
Hey guys, I just picked up a 1994 GSXR 750w and the headlights won't come on/flicker/ANYTHING!
Checked everything obvious, Fuse is good, but found two burnt connectors, re-wired the WHT headlight wire at all burnt connections, and still nothing! I am only getting .03 volts, AT the fuse block for the headlight... The wire coming INTO the fuse block that leads to the headlights ALL .03 volts..... I am thinking I might have a burnt wire, touching the frame... I might just Run a new wire, from the fuse block, to the HI/LOW switch....ANY ideas??? Thanks Guys!!!
|
|
|
|
Post by kz1000st on Dec 23, 2013 14:08:34 GMT -6
That sounds like a good idea.
|
|
Scooter Doc
Currently Offline
Posts: 274
Likes: 1
Joined: Aug 25, 2013 21:40:53 GMT -6
|
Post by mikey34 on Dec 23, 2013 16:28:12 GMT -6
Got my headlights working BTW! Somebody that owned it before me, had all kinds of screwed up wiring! I studied the schematic, and found the issues, Really happy about that, so I can keep the stock HI/LOW switch! UNFORTUNATELY, I cracked the lens, testing. I dropped it.... But the wiring works! So I'm still happy! This way, I can either get a new lens, or Street fighter Assembly, and the wiring will be ready to go!
NOW, I have noticed the Radiator Fan, is NOT coming on... even after the bike warms up, if its not moving, it will start to get hot, thats when the FAN, SHOULD, kick on, But since it's not, I am thinking either Temp Sensor(Unlikely cause the gauge works...) OR could be another hack job on the wiring....
|
|
Clinician
Currently Offline
Posts: 17
Likes: 0
Joined: Oct 10, 2013 5:24:17 GMT -6
|
Post by thomaspm on Dec 24, 2013 9:38:36 GMT -6
Got my headlights working BTW! Somebody that owned it before me, had all kinds of screwed up wiring! I studied the schematic, and found the issues, Really happy about that, so I can keep the stock HI/LOW switch! UNFORTUNATELY, I cracked the lens, testing. I dropped it.... But the wiring works! So I'm still happy! This way, I can either get a new lens, or Street fighter Assembly, and the wiring will be ready to go! NOW, I have noticed the Radiator Fan, is NOT coming on... even after the bike warms up, if its not moving, it will start to get hot, thats when the FAN, SHOULD, kick on, But since it's not, I am thinking either Temp Sensor(Unlikely cause the gauge works...) OR could be another hack job on the wiring.... On my Jonway yy250 T I have a temp fan sensor switch that is screwed into my radiator and my temp sensor switch is up by my thermostat, so check to see if you have 1 at your radiator. |
|
Doc's Anything Goes
Currently Offline
Say no to scooter abuse
Posts: 3,873
Likes: 155
Joined: Mar 31, 2010 19:07:16 GMT -6
|
Post by jct842 on Dec 24, 2013 10:52:25 GMT -6
You could do like some one wired my riva.....on all the time. I think riva's had a problem with the temp switch or thermostat and it works fine like that now. john
|
|
Scooter Doc
Currently Offline
Posts: 274
Likes: 1
Joined: Aug 25, 2013 21:40:53 GMT -6
|
Post by mikey34 on Dec 24, 2013 15:06:30 GMT -6
That's what I kinda figured JCT842, No reason why it would hurt, I would just "like" to keep the bike as "neat" as possible, BUT if all else fails, I will wire it to the ignition switch *shrugs*
|
|
