|
|
Post by mxmatt on Feb 21, 2014 12:30:27 GMT -6
Yesterday I pulled the CVT cover off so I could change my sliders to rollers. Got'r done.
When I got the cover off and laid it down I noticed a tiny spring (dammit if I didn't lose it already) laying loose in the bottom of the cover. Having disassembled nearly 95% of my motor recently I do not recall seeing anything like this and don't know where it came from. Wish I had a picture to post. I'd say the spring is about 1cm long and about 3mm wide. Any guesses from you guru's?
|
|
|
|
Post by Bashan on Feb 21, 2014 15:59:46 GMT -6
Oh no, not the torque absorber spring!!  Kidding! It's nothing, probably some guy at the factory dropped it in there. Rich
|
|
|
|
Post by mxmatt on Feb 21, 2014 16:45:51 GMT -6
Oh no, not the torque absorber spring!! Kidding! It's nothing, probably some guy at the factory dropped it in there. Rich Glad to hear that it is nothing. It is still a mystery to me as I have no idea where it came from. I was in there cleaning it out not three weeks ago and I never saw it. Note: Mysterious tiny spring inside CVT cover is NOT a torque absorber spring. *starts googling* |
|
|
|
Tiny Spring
by: Alleyoop - Feb 21, 2014 17:07:00 GMT -6
Post by Alleyoop on Feb 21, 2014 17:07:00 GMT -6
If you maybe cleaned out the carb and taking the fuel ratio screw completly out it sounds like a spring that goes in there to keep the screw from vibrating loose. Alleyoop  |
|
|
|
Post by Bashan on Feb 21, 2014 19:14:29 GMT -6
|
|
|
|
Tiny Spring
by: Alleyoop - Feb 21, 2014 19:22:00 GMT -6
Post by Alleyoop on Feb 21, 2014 19:22:00 GMT -6
I am back here and there, still feel like crap and the stuff just won't stop coming out of my nose(HAHA). I am hoarse from coughing so much and still not feeling good. So I am on only a little bit here and there.
HEY I LIKE THAT PIC I am going to copy it and make a small one and put it in my SIG(HAHA).
Alleyoop
|
|
|
|
Post by Bashan on Feb 21, 2014 19:38:20 GMT -6
Well you still seem better than you were. I thought that pic just fit you to a T somehow. I used to get sick like that every damn year when I lived in Toledo. Sick as a dog for a month. It has happened once since I moved to the south, 31 years ago. Come on down buds, the weather is fine!
|
|
|
|
Post by mxmatt on Feb 21, 2014 19:40:27 GMT -6
If you maybe cleaned out the carb and taking the fuel ratio screw completly out it sounds like a spring that goes in there to keep the screw from vibrating loose. Alleyoop I'mo check that. |
|
|
|
Tiny Spring
by: Alleyoop - Feb 21, 2014 20:39:21 GMT -6
Post by Alleyoop on Feb 21, 2014 20:39:21 GMT -6
Just a thought because of the size you say it is. Maybe you used the cvt cover to hold parts and that is why it is there. The only other place a small spring like that is under the IDLE SPEED SCREW but that one is a little bigger.
Alleyoop
|
|
Scooter Doc
Currently Offline
Triangular Shaped Head!!
Posts: 437
Likes: 8
Joined: May 24, 2013 21:16:22 GMT -6
|
Tiny Spring
by: FACE PLANT FOR LIFE - Feb 21, 2014 21:03:18 GMT -6
Post by FACE PLANT FOR LIFE on Feb 21, 2014 21:03:18 GMT -6
Maybe it was the torque isolation converter probe *rolls on floor in tears*
|
|
|
|
Post by Bashan on Feb 21, 2014 21:54:21 GMT -6
Clever....and funny. 
|
|
? And again at 2033mi. 
Kidding! It's nothing, probably some guy at the factory dropped it in there. Rich
..BAD TO THE BONE..
