Certified Clinician
Currently Offline
Icebear Trike 150-9
Posts: 56
Likes: 0
Joined: May 31, 2010 20:32:41 GMT -6
|
Post by Triker98304 on Jun 15, 2010 14:23:41 GMT -6
Icebear trike 150-9. The rubber keeps lifting off the foot rest and slapping the back side of my leg. Will the rubber adhesive for weather stripping work to keep the rubber on the trike???
Thanks Triker98304
|
|
Doc's Anything Goes
Currently Offline
Posts: 765
Likes: 28
Joined: Apr 2, 2010 6:37:07 GMT -6
|
Post by rapidjim on Jun 15, 2010 15:12:50 GMT -6
It should work fine.
Jim
|
|
|
|
Post by Alleyoop on Jun 15, 2010 16:40:39 GMT -6
Use VELCRO, you don't want to have the rubber stuck down because you may need to take the bottom cover off for easy access to your fuel pump, gas tank float sensor, adjust the valves etc.. The screws and Bolts are under the Floor Board rubber or aluminum cover to take the bottom side off.
Alleyoop
|
|
|
|
Post by ♔Big Guy♔ on Jun 15, 2010 21:41:26 GMT -6
Check out Dap Bluestick... you can buy it at most hardware stores and it is a reusable adhesive. If you can't find it, you can order it online here at Amazon for $6.50 shipped - it's $4.99 at the hardware store. I use this stuff on all sorts of things and it sticks very well, but you can also get it off and reuse it! -Rich |
|
|
|
Post by 250cc on Jun 16, 2010 6:18:47 GMT -6
Big Guy is 100% correct on the Dap product. I used to work at an ACE Hardware and it was amazing at the number of customer stories about that product and how happy they were with it.  |
|
..BAD TO THE BONE..
