Clinician
Currently Offline
Posts: 32
Likes: 0
Joined: Mar 30, 2016 19:45:59 GMT -6
|
Post by sooonmitch on Mar 30, 2016 20:44:50 GMT -6
|
|
Clinician
Currently Offline
Posts: 32
Likes: 0
Joined: Mar 30, 2016 19:45:59 GMT -6
|
Post by sooonmitch on Mar 30, 2016 20:00:35 GMT -6
Ok so.... Lets get straight to business. I recently bought a Roketa Bahama 50cc 2008 scooter. It ran-ish. It had bearly any power and couple bearly get a top speed of 20 mph downhill. Terrible, so I decided to work on it. I was able to adjust the valves, and even opened up the carburetor and cleaned it out. It would bearly start up but when it did it helped a 3000 RPM and I could drive it mostly. I drove it around, hoping that it iron the starting issue out and it worked for a bit untill I would get a higher speed and it would start bogging down randomly and even started back firing. Now it will not start up a day after. It still turns over, it "gets hot" indicating combustion. It does not start though. It never started easily since I got it and now I have done all these things and cant think of anything else to do. - Messed with F/A ratio
- Messed with Idle
- Messed with valves
- Messed with the cam shaft and even tuned it to the "T" line
- It gets gas
- It injects the gas with the electric injector.
- Starter works fine / battery is charged and ready to go.
I am out of ideas at this point. Please any help or advice would be great! This is my very first actual moped other than dirt bikes and four wheelers. I really want to ride it and have fun but its raining on my parade :/
|
|