I destroyed a bolt inside my crankcase By salmilo1 (Read 1,109 times)

[salmilo1]

So is there a product like crank wash or crank flush that could help

[tvnacman]

Sept 11, 2014 10:10:01 GMT -6 salmilo1 said:

So is there a product like crank wash or crank flush that could help

That product works great when you split the case .

Put the wash in there , order an extra set of gaskets for when you have to do it again in a month or two .

Don't be lazy , take your time do it right .


John

[salmilo1]

Can it be done without a impact gun

[jct842]

Stop by a pawn shop for a budget impact. Harbor f has them on sale all the time too. With out one things get broke. If you do go inside make damn sure the oil pump is working. Sounds like last bb had parts not compatable with each other. The is no flush that will disolve metal parts. One little shard or metal sliver hidden in a passage that gets inside the oil pump after you get it together and it will have been cheaper to replace the engine with brand new one, adding all you have in it now.

[jct842]

How about letting jr put a post delete so
I CAN DELETE A DOUBLE POST?

We never had a problem with double posts with old soft ware and before the "bells and whistles"

[tvnacman]

It is kinda nice to be able to delete you own duplicate posts . But I'm sure its done for good reason .

John

[salmilo1]

Good advise about the impact thank you and I will make sure to do so. And I will put in some better bearings while I am in there I will also replace with a oil pump that came in my second bbk I destroyed and it also came with a gasket kit

[salmilo1]

You were correct I got the 64mm valves beacouse I couldn't find a bbk with the 69mm I had to fully extend the valve adjusters and flip the nut to the other side of the rockers

[Bashan]

Where's the retainer clip for that valve? That valve has dropped bud, that didn't do any good.

[salmilo1]

That was the first bbk the bolt fell off of and got destroyed in the crankcase lol the valve got destroyed too