Senior Clinician
Currently Offline
Posts: 155
Likes: 5
Joined: May 18, 2010 13:54:19 GMT -6
|
New Clutch
by: epdowd - May 22, 2015 21:19:37 GMT -6
Post by epdowd on May 22, 2015 21:19:37 GMT -6
I just bought a new standard type clutch for my 150cc Znen. The new clutch appears to be compressed compared to my old one. The main spring is compressed much more between the pulley's than the old one I guess is what I'm trying to say. It's definitely a legit clutch. Thanks for the help...
|
|
|
|
New Clutch
by: cyborg - May 22, 2015 21:57:46 GMT -6
Post by cyborg on May 22, 2015 21:57:46 GMT -6
I'm glad you have the right thing,,,the old ones spring may have been getting fatigued and weak
|
|
Senior Clinician
Currently Offline
Posts: 155
Likes: 5
Joined: May 18, 2010 13:54:19 GMT -6
|
New Clutch
by: epdowd - May 23, 2015 6:12:56 GMT -6
Post by epdowd on May 23, 2015 6:12:56 GMT -6
OK, cyborg, thanks for your reply. However, now that I have the old clutch off I can see I have the wrong size clutch compared to the old one. I have a Znen 150-18T with 16 inch wheels so this must make the difference ?..It has had a slight chatter-shudder effect on and off since I got it several years ago, It has become much worse now. I have checked the motor mounts, I put on a DR. Pulley Variator and sliders a couple years ago to eliminate the original variator. So then I figured maybe the clutch is the bad guy, Here is some pictures of the old and new clutches, Quite a difference in size !!. Well, I've read "How to post pictures" but me and my computer are too dense  to get it done. I could email them if someone would post the pictures. In the mean time I'll work on posting the pics.. Thanks a lot.. |
|
Senior Clinician
Currently Offline
Posts: 155
Likes: 5
Joined: May 18, 2010 13:54:19 GMT -6
|
New Clutch
by: epdowd - May 23, 2015 21:18:46 GMT -6
Post by epdowd on May 23, 2015 21:18:46 GMT -6
 Tiny Pic The measurements are supposed to be 140mm and 155mm.. |
|
Senior Clinician
Currently Offline
Posts: 155
Likes: 5
Joined: May 18, 2010 13:54:19 GMT -6
|
New Clutch
by: epdowd - May 23, 2015 21:21:26 GMT -6
Post by epdowd on May 23, 2015 21:21:26 GMT -6
 Tiny Pic The measurements are supposed to be 140mm and 155mm |
|
Senior Clinician
Currently Offline
Posts: 155
Likes: 5
Joined: May 18, 2010 13:54:19 GMT -6
|
New Clutch
by: epdowd - May 23, 2015 21:54:20 GMT -6
Post by epdowd on May 23, 2015 21:54:20 GMT -6
About the only place I can find a 155mm clutch for this 150-18T with 16" wheels is Scooter Parts for Less.. Anyone know anything about them or some other source ??. I think I'll go soak my head  |
|
|
|
New Clutch
by: cyborg - May 23, 2015 22:59:54 GMT -6
Post by cyborg on May 23, 2015 22:59:54 GMT -6
Talk to Jim at rapid repair or tvnacman,,,they both have tile ads at the top of the homepage
|
|
Doc's Anything Goes
Currently Offline
Posts: 2,739
Likes: 66
Joined: Oct 23, 2010 19:29:21 GMT -6
|
New Clutch
by: tvnacman - May 24, 2015 4:58:04 GMT -6
Post by tvnacman on May 24, 2015 4:58:04 GMT -6
I have the clutch for your scooter without the bell. I did not make the connection til this morning. Your signature has two scooters listed. The clutch will work for the other if it is not 16" wheels. Just for a quick note the intake manifold, variator, clutch, crank are different to.
John
|
|
Senior Clinician
Currently Offline
Posts: 155
Likes: 5
Joined: May 18, 2010 13:54:19 GMT -6
|
New Clutch
by: epdowd - May 24, 2015 7:14:04 GMT -6
Post by epdowd on May 24, 2015 7:14:04 GMT -6
OK John, That is my mistake for not mentioning the 16" wheel size. Not your fault for sure. Pretty dumb of me to not ask questions first  . Thanks for your patience !! |
|
to get it done. 
. Thanks for your patience !!