Tired Of Taking Out Enricher or Disconnecting it By Alleyoop (Read 1,452 times)

[Alleyoop]

Are you tired of taking out your Enricher and or Disconnecting it to take your Carb out. Well how about doing this. Go to an Auto Parts Store and buy a Quick Disconnect for little over $2.00 bucks.
Each End has a Quick connect so cut it in half then Take your Enricher and cut the wires about 6 inches away from the Actual Enricher. Then Connect each Quick Connect to each side of the Enricher wire. Now you never have to disconnect the Enricher from the power source and or have to take out the Enricher when messing with the Carb, just unplug it

It was raining today AGAIN, so I decided to mess around and this mod just for the FUN of it. I don't really need the Enricher now since I replaced it with the Manual Choke Conversion But just in case and besides its COOL

The Quick Connect coming from the Power Source I wanted it protected so I put it inside a piece of Tubing and put it under the wire holder. The Actual Enricher Half I carry in a Zip Lock Bag with other essentials.
Alleyoop

Here are pictures of the setup:

[Bashan]

Great idea! When I was trying to get my carb set right with the UNI, jets, and needle I must have taken that carb out 20 times. The biggest hassle was the enricher, I either forgot to unplug it in my haste or got the long wire caught on something pulling the unit out of there. It would have been great to have a short plug on it. I like the SAE connector, that's like the ones on my battery chargers, solid and convenient. Very nice, Rich