Certified Clinician
Currently Offline
Posts: 88
Likes: 1
Joined: Oct 17, 2013 5:45:30 GMT -6
|
Post by johnjs on Mar 13, 2016 7:12:43 GMT -6
I lost both left and right blinkers on my china made 50cc..is there a relay like on cars that i need to find and where to begin looking? thanks
|
|
|
Post by Alleyoop on Mar 13, 2016 12:31:31 GMT -6
Yes the FLASHER it will be behind the front cowl and it is ROUND very easy to spot. You can get one at an auto parts store just make sure it has the same NUMBER of connectors TWO OR THREE. Alleyoop
|
|
Doc's Anything Goes
Currently Offline
Posts: 2,739
Likes: 66
Joined: Oct 23, 2010 19:29:21 GMT -6
|
Post by tvnacman on Mar 13, 2016 16:31:38 GMT -6
I would spray the switch first. Put a paper towel under the switch front and back. Spray the wd40 into the knob area and work the switch back and forth quickly till the wd runs clean. Wipe it down and see if it works.
John
|
|
Certified Clinician
Currently Offline
Posts: 88
Likes: 1
Joined: Oct 17, 2013 5:45:30 GMT -6
|
Post by johnjs on Mar 14, 2016 5:43:47 GMT -6
Thanks guys...I found it and the connections have a fair bit of rust in them but i did the wd40 trick and they work now but im gonna clean alot more in there while its apart. Thanks again for the help.
|
|
Senior Clinician
Currently Offline
Posts: 141
Likes: 5
Joined: Sept 18, 2015 17:23:20 GMT -6
|
Post by jaxrhapsody on Mar 17, 2016 13:39:06 GMT -6
Thanks guys...I found it and the connections have a fair bit of rust in them but i did the wd40 trick and they work now but im gonna clean alot more in there while its apart. Thanks again for the help. Then you might want to get some dielectric grease to put on the contacts. My horn doesn't always work, and I suspect the rusty contacts are why, as the only thing I've done is put a bigger horn on it.
|
|
Doc's Anything Goes
Currently Offline
Posts: 2,739
Likes: 66
Joined: Oct 23, 2010 19:29:21 GMT -6
|
Post by tvnacman on Mar 17, 2016 18:38:45 GMT -6
+1 on the dielectric grease!!!!!!!!!!!!!!!!!
John
|
|