Seat/Cable Key Assembly for 07 Roketa Aruba (Cable unhooked) By usmcmech87 (Read 401 times)

[usmcmech87]

Hello all, 

I was wondering if anyone by chance had a picture or decent instructions as to how the cable that pops the seat is suppose to be setup on the key assembly.  I thought I had taken a picture before I disconnected by I definitely did not  .  For now I am reaching from under the scooter to pop the seat open, but I dont want to have to do that forever.  I could rig it but I'd rather do it the right way.  

Thanks to everyone in advance!

[Alleyoop]

That scoot uses the KEY TO OPEN the SEAT? I put up a picture of the scoot and it shows it has the KEY ON THE FENDER to open the seat?.

[usmcmech87]

Correct yes.. the key mechanism is on the left fender... the cable that attaches to the key mechanism on the left fender is disconnected. I hope that makes a little more sense.

[Alleyoop]

[usmcmech87]

Perfect, got that part done. Thank you for the help there. Last question about the cable setup is do you know how you're suppose to wrap the cable around this end? I can't just slide in the cable as there is no tension.

[Alleyoop]

All that does is turn and pulls on the cable to release the latch.