Spy 5000 By i1blaq1 (Read 280 times)

[i1blaq1]

Let me say it a OK alarm thus far butt I need to work the kinks out. take a look at the video (sorry for funny cigarette)

plus.google.com/111594443010249981131/posts/GAivvH4vhnG

I added my led accents to alarm but I want my leds to turn on when bike is running to butt when I put power to that wire while still connected for some reason it sends power to a turn signal for steady illumination instead of powering the led power bank / brain.


Also remote start works but only when key is in the on position. Nor will it remotely turn off once it's been remotely started with key in. What good is that? The remote will not kill the bike as stated it would as a anti hijack feature. But it still will sound and shine the lights

The great thing about this is if I wanted to leave it like that it was the simplest ever to set up literally plug & play




But I don't I want it too work properly.

If anybody can help with those problems would be great.

[i1blaq1]

plus.google.com/111594443010249981131/posts/fAVPDGbfRZC

So @ least I got this far now I gotta figure out this remote start stuff

[i1blaq1]

Thus far since I figured out what I need for the accent lights setup and how it go I just made a fake wire harness for it so it can look much cleaner. And I added another relay. Not gonna tape it up yet because I will add one more but the flasher relay cost me 17 bucks @ auto zone so I'll get the next one off the net sense I know now what I need for it

[i1blaq1]

I don't quite get this diagram pertaining to my issues. Do I cut wire from ignition? I'm just stumped about this ? I'm sure I can get this, I just need a lil push.

[i1blaq1]

Any help would be appreciated on this topic rather then just the views and no comments

[trashtruck12172]

I'm not familiar with this but hey, I'll give it a shot. sounds like unit is back feeding into the turn signal relay. have you tried to hook it up to the neg side of the led's?

[i1blaq1]

Jul 5, 2016 15:17:46 GMT -6 trashtruck12172 said:

I'm not familiar with this but hey, I'll give it a shot. sounds like unit is back feeding into the turn signal relay. have you tried to hook it up to the neg side of the led's?

Lights work fine it just will not remotely shut off or when I turn key only kill switch will kill bike

[trashtruck12172]

you may have to disable the kill switch on the bike and wire it into the alarm system. turning the key off should kill the engine. using the diagram you supplied, the wire i don't understand is labeled antenna (engine cut off). it also looks like the unit's pink wire goes to the key switch in stead of the wh/bk wire, but I could be wrong.