Clinician
Currently Offline
Posts: 1
Likes: 0
Joined: Jul 13, 2016 11:18:28 GMT -6
|
Post by scoootin on Jul 13, 2016 11:23:01 GMT -6
Hello, I bought an icebear maddog 2 weeks ago and I changed the oil and gear oil. However when doing the oil I put a little to much & figured I would burn the extra off - bad idea.. I white smoked all the car behind and bogged out. I think this was from putting too much oil. Then I was riding again yesterday and it white smoked again and after it was below motor oil level, I had to pull over and let it cool down, then shortly after it wouldn't even get about 3000rpm.. I'm thinking I blew a head gasket, what do y'all think? Thanks!
|
|
Senior Clinician
Currently Offline
Posts: 223
Likes: 17
Joined: Jul 11, 2015 15:38:38 GMT -6
|
Post by trashtruck12172 on Jul 13, 2016 12:02:34 GMT -6
run a compression check and you may have fouled the plug. overfilling the oil is not a good idea.
|
|
|
Post by crwford on Jul 13, 2016 15:50:35 GMT -6
First drain out the to much oil. And like person said compression test not with your finger LOL
|
|