Rebuild? 49cc to 100cc. By therellik (Read 1,156 times)

[2stroked]

And another point you seem to have glazed over, you mentioned in your Anti-90 post, that people were growing these 50-52mm kits on high mileage engines with used cranks etc.,well the first post mentions that the scooter in question is smoking probably due to rings but it's still being driven, how good do u belive THAT crank is going to handle that large bore/piston?

[czmdiver]

May 4, 2017 9:18:43 GMT -6 2stroked said:

And another point you seem to have glazed over, you mentioned in your Anti-90 post, that people were growing these 50-52mm kits on high mileage engines with used cranks etc.,well the first post mentions that the scooter in question is smoking probably due to rings but it's still being driven, how good do u belive THAT crank is going to handle that large bore/piston?

The Poster's Motor is Clapped and Bagged Out, Any Mod's that would Increase  HP would be a Bad Idea without a Proper Complete Re-Build,  Thats a No Brainer.

Neil and Bob haven't demonstrated they have the combined knowledge or experience to get a job at the local lawnmower shop.

[2stroked]

I do not have a flipping clue who Neil nor Bob is. Brent is 90's name. He has crap loads of great videos posted on you tube dealing in every aspect of two stroke scoot engines. From 49cc stockers to built and stroked 100+cc beasts. I can't figure what you are looking at, but with what I have seen from 90, I will believe him over nearly anyone on any of these forums when it comes to scoter engines. Two stroke I have personal experience in following his instructions and tips, and because of that I have a Mina based Beamer that runs a gps verified 48mph. Would do better if I had money for upgears.
You believe what you believe, but I believe in what I have seen, and experienced. For all I know the dang 139's could be bored to 100+ and be perfectly fine on a stock crank. I wouldn't dream of pushing one that far but hey, what do I know.
Peace

[2stroked]

This has been fun, but I am not going to be a substitute for a certain member here for you to argue with. My experience with you has shown me that you enjoy arguing, and...get this "Snit Talking".
These forums exist to help people with scooter problmes and as a place for people all over the world to come together to enjoy the company of other people that share a general interest. You mentioned that a certain member would Continuously talk you down and CLAIM you didn't know what you were talking about. I honestly think you miss the confrontational environment that the two of you shared. I'm not going to contribute any further into your games. Sorry. A member asked a question, I gave him MY opinion, and you instantly decided to Alley me. Nope I'm done with this thread,and I am done talking to you. Good day and God Bless.

[czmdiver]

May 5, 2017 13:50:19 GMT -6 2stroked said:

I do not have a flipping clue who Neil nor Bob is. Brent is 90's name. He has crap loads of great videos posted on you tube dealing in every aspect of two stroke scoot engines. From 49cc stockers to built and stroked 100+cc beasts. I can't figure what you are looking at, but with what I have seen from 90, I will believe him over nearly anyone on any of these forums when it comes to scoter engines. Two stroke I have personal experience in following his instructions and tips, and because of that I have a Mina based Beamer that runs a gps verified 48mph. Would do better if I had money for upgears.
You believe what you believe, but I believe in what I have seen, and experienced. For all I know the dang 139's could be bored to 100+ and be perfectly fine on a stock crank. I wouldn't dream of pushing one that far but hey, what do I know.
Peace

Oh you shouldn't get your panties in a wad because I agreed with you on the poster with the Clapped out motor, its a Scooter board, I don't take it very seriously.
I'm not much for opinions and internet parroting I base what I post as a professional in the industry at a high level and present fact based on personal experience.
Neil and Bob is just some humor, think of it Neil and Bob. lol get it?
It has been fun God bless you too and Ill see ya over on Its the Ride.
                    Cheers

[czmdiver]