Clinician
Currently Offline
Posts: 6 
Likes: 0
Joined: Oct 20, 2017 20:28:44 GMT -6
|
Post by dale on Jan 27, 2018 19:22:19 GMT -6
I have a brand new battery and it reads 12.83 on the volt meter. I replaced the starter and all the switches, kill switch, start switch ect. Horn, turn signals and brake lights work. It just does not crank. Not even a click. Driving me crazy! Any help would be much appreciated. Thanks
|
|
|
|
Post by cyborg on Jan 28, 2018 9:28:41 GMT -6
Bad solenoid ? Cross up the terminals with an old screw driver,,,it should lite
|
|
Clinician
Currently Offline
Posts: 6
Likes: 0
Joined: Oct 20, 2017 20:28:44 GMT -6
|
Post by dale on Jan 28, 2018 17:59:14 GMT -6
Great, makes sense thanks!
|
|
Senior Clinician
Currently Offline
Posts: 124
Likes: 6
Joined: Jun 30, 2017 22:36:31 GMT -6
|
Post by lostforawhile on Jan 28, 2018 20:30:22 GMT -6
are you pulling the brake? does your brake light come on? the solenoid power comes from the brake, and the ground from the kill switch when turned to off, after it goes through the start switch. do you have a kickstand down? some kill the ignition, some prevent from starting
|
|
