Clinician
Currently Offline
Posts: 2
Likes: 0
Joined: Mar 5, 2018 22:20:11 GMT -6
|
Post by troyboy14 on Mar 5, 2018 22:26:38 GMT -6
So I first want to start out by saying that I have not had my GoPed Bigfoot started in awhile it has a zennoa 23cc engine pretty fast. So I decided as of yesterday to get it going again and when I got it to start it immediately goes to high-revving like I'm on the throttle like fully but I'm not giving it any gas and theIdle screw is backed all the way out just to make sure it's not giving it any throttle, don't know what to do, any help would be totally awesome by the way I am not that inclined when it comes to these things I appreciate any feedback thanks.
|
|
|
|
Post by czmdiver on Mar 6, 2018 6:42:13 GMT -6
Classic Two Stroke Throttle Run a Way.
A massive air leak, most likely a rotten Crank Seal.
Good Luck
|
|
|
|
Post by cyborg on Mar 6, 2018 9:03:44 GMT -6
Yep
|
|
Clinician
Currently Offline
Posts: 2
Likes: 0
Joined: Mar 5, 2018 22:20:11 GMT -6
|
Post by troyboy14 on Mar 6, 2018 18:56:31 GMT -6
So I first want to start out by saying that I have not had my GoPed Bigfoot started in awhile it has a zennoa 23cc engine pretty fast. So I decided as of yesterday to get it going again and when I got it to start it immediately goes to high-revving like I'm on the throttle like fully but I'm not giving it any gas and theIdle screw is backed all the way out just to make sure it's not giving it any throttle, don't know what to do, any help would be totally awesome by the way I am not that inclined when it comes to these things I appreciate any feedback thanks. So what am I looking at? a new engine or replace crank seal? |
|
|
|
Post by cyborg on Mar 7, 2018 8:14:52 GMT -6
Just replace the crank seals
|
|
