Clinician
Currently Offline
Posts: 2
Likes: 0
Joined: Oct 12, 2020 5:45:00 GMT -6
|
Post by dougiedoug on Oct 12, 2020 5:49:13 GMT -6
I just replaced clutch, variator, belt.. I have no bottom end torw, the clutch bell turned blue from heat, can not figure why its slipping please help..
|
|
|
|
Post by kz1000st on Oct 12, 2020 20:33:11 GMT -6
Check that the arms on the clutch are moving through their throw range and not sticking. It sounds like all the pads are not making contact with the bell. Also is the rear brake sticking? You might have a drag on the drive.
|
|
Clinician
Currently Offline
Posts: 2
Likes: 0
Joined: Oct 12, 2020 5:45:00 GMT -6
|
Post by dougiedoug on Oct 13, 2020 3:54:19 GMT -6
I just now changed contra spring to 1500rpm and clutch springs to 2000rpm...still the same. I think mabe it's not getting up to high rpm... I'm going to replace all electrical, cdi,stator etc. I have total rebuilt engine, I installed a a9 cam, i might change back to stock cam, something just isnt right.
|
|
