Clinician
Currently Offline
Posts: 1
Likes: 0
Joined: Apr 16, 2022 20:51:08 GMT -6
|
Post by crashbeats on Apr 16, 2022 21:04:22 GMT -6
I have a 2015 TaoTao with the gy6. No spark at all. Replace the stator/pickup coil, wiring harness, cdi, rectifier and coil pack. STILL had no fire. Did the disconnect at the cdi for the kill switch etc etc. Finally broke down to putting a ohm meter on the stator. With the stator unplugged and testing on the stator side of the harness, I'm getting 35vac from exciter coil, .07vac from the pickup(very low). Tried 3 pickup coils with similar results. After all this, I tried to read the Vdc coming from the cdi to the coil pack and Im getting 4vdc at all times to the positive on the coil. When cranking over the voltage to the coil drops below 2volts instead of going higher to create spark.
|
|