Post by guzzijohn on Feb 9, 2024 22:59:50 GMT -6
I have an ‘07 Znen 250 project bike. Its axle nut was missing and the splines rather loose. It had a hard 2K life with some body panel repair & repaint plus lock and wiring damage showing probably theft and abandonment (it came from police auction). I used Loctite 660 on splines and red on nut. There is a little runout on the wheel but will decide if it needs an axle and wheel after reassembly and warm weather. Can’t wait as it runs fine. It would be nice if there were wheels with cast in steel splines so they weren’t so fragile. I’ve had 60+ bikes including this fourth scooter over that many years of riding and wrenching on them. Just wondering what others have seen or done with similar issues. 
