:Jet Drilling: To whom it may concern By mapbike (Read 1,058 times)

[mapbike]

This link below is to a fellas site that I have bought a lot of parts from in building the small performance engines I was messing with a couple of years ago, he has loads of great (How To) information here and since I had used this chart when tuning the GX200 carbs I thought it may also come in handy for anyone tuning their GY6 carb. as well.
A propane torch, a little piece of solid solder, and a set of numbered bits and you can have any jet size you need in just a few minutes, not really any need to buy multiple new jets, I always just mod the one I have using this process.

After going over this site you may even want to get some stuff together and build that mini bike or go kart you always wanted to play with......! this guy is super to work with.... and much of the Mod-ing info. on this site will apply to modifying these scooter engines also.

Hope this helps someone that needs to jet up but doesn't want to have to buy several different jets trying to get it right.

AFFORDABLE GOKARTS JET DRILLING PAGE

[Bashan]

Many thanks Mapbike, that's a great site in general! There's lots of parts that are applicable for scooters at decent prices. I noticed on one page where he uses a radiator hose between the carb and engine; I guess that answers that age old question. I'll find a place to put this URL on our site so it doesn't get lost in the shuffle. Thanks again, Rich

[mapbike]

Aug 17, 2010 13:27:56 GMT -6 Bashan said:

Many thanks Mapbike, that's a great site in general! There's lots of parts that are applicable for scooters at decent prices. I noticed on one page where he uses a radiator hose between the carb and engine; I guess that answers that age old question. I'll find a place to put this URL on our site so it doesn't get lost in the shuffle. Thanks again, Rich

Your welcome sir, I thought there might be a few things on the site that might interest some people here on the forum, lots of good how to information on several topics, and like you said there are some great parts and pieces at good prices here as well.

Shan

[Bashan]

It is now a permanent part of Air, Fuel, and Carb in the Tech section with a suggestion to peruse the rest of the site after reading the jet page.

[mapbike]

Thats Great maybe there is soem info. there that will help someone in the rejetting proccess.

Anytime I remember something or find something that I think may be helpful I'm gonna post it and hope that someone will benefit from it.

Shan