EMERGENCY FLASHER By Alleyoop (Read 508 times)

[Alleyoop]

Hi Troops,
I have installed a Emergency Flasher, works great. The two front and rear turn signals all flash just like in your car.

You can get a Emergencey Button with the Triangle symbol on it like I did or you can use a Two Pole On and Off Switch.

Your Left Handlebar has the wireing for your turn signals.
1. The Orange-Yellowish wire coming from you left handlebar is for your LEFT Turn Signal.
2. The Light Blue Wire coming from your left handlebar is for your RIGHT Turn Signal.
3. The GRAY wire coming from your left handlebar is your HOT WIRE.

1.Splice into the Orange-Yellowish Wire from your Left Handlebar and connect it to the MIDDLE TERMINAL of your Switch.
2. Splice into the Light Blue Wire from your Left Handlebar and connect it to
Either OUTSIDE TERMINAL of your Switch.
3. Splice into the GRAY Wire(HOT) from your left Handlebar and connect it to the REMAINING Outside Terminal of your Switch.
4. Turn your key on and press the button and see if they start blinking.
DONE.

You can see that both Green Turn Signal indicators are on.
And you can see where I mounted the Emergencey On Off Button.
Alleyoop