CVT Belt Change Tip By Bashan (Read 3,238 times)

[Bashan]

When changing your CVT belt it's always a pain to keep the variator ramp plate from moving in and the weights shifting. I use a plastic divider for a tackle or parts box and drill a few holes in it:

Then bolt it into one of the CVT cover bolt holes against the plate to keep it from sliding in. I find it's much more secure than the cardboard wedge that I've seen some folks use:

[tvnacman]

hmm whats with the clamp

[Alleyoop]

HEHEHE!! The clamp he uses to squeeze the Outside Clutch Plate so he can push down the belt to give him enough slack to get the belt over the Variator Fan:) That way he doesn't have to take the Variator Fan Plate off.

That also safes your fingers and strength for other work
Alleyoop