intake manifold By ncyukon54 (Read 805 times)

[ncyukon54]

I have a 2008 apollo touring, with a yy250t engine. looking to replace the intake manifold know where I can find one ? mine is beond repair

[Alleyoop]

Click on the Kidnmeparts ad above the page they have them for the 250ccs.
Alleyoop

[Cruiser]

Welcome to Scooter Doc. This particular engine tends to stress the intake manifold because the carb and airbox are supported only by the manifold which can crack and leak over time. Is this what happened to your manifold? Here is a support which is supposed to cure this problem:

marketplaceadvisor.channeladvisor.com/StoreFrontProfiles/DeluxeSFItemDetail.aspx?sid=1&sfid=92390&c=879539&i=195496146

If you're handy, a simplified bracket (cheaper) shouldn't be too hard to make up.

[ncyukon54]

have the yy250t linhai ,nobody seems to have the one i need . The one i have has 2 ports

[Alleyoop]

The two ports on the intake are hard to find. I have only found them for the 150s, Scrappydogs has the 2 port for the 150s.
Alleyoop

[Alleyoop]

Yes the 150s have come with a 24mm and the 250s come with a 30mm. Before buying one contact them and ask if it has 2 ports. They are hard to find and if they do not show the two ports or mention it, it most likelty does not have two ports. That is a selling point, not showing a picture of the two ports QUESTION IT.
Alleyoop

[ncyukon54]

THANKS TO EVERYONE , GOT ONE FROM RAPID WORKS GREAT