electric question By workdog95 (Read 626 times)

[workdog95]

I have a cigarette lighter in my under seat bucket. I also have one in the front of the bike. What I want to do is run a wire from the front to the one in the under seat and just piggy back off it (so I dont have to run 2 separate wires to the battery.
The under seat plug has 12g wire and a 10 amp blade fuse in it.

Will this work or will I burn down my scoot?

Thanks guys

[LUKE]

i just want to clarify, ..is it really a cigarette lighter you want to install or just a 12volts outlet?

if it's a 12v outlet,i don't see any problem doing that type of connection..i see a lot of 12v connection with 3 outlet in one socket being sold @ wallmart etc...it should be ok.

now cigarette ligher is a different story...it needs higher higher amp wire and fuse..

[workdog95]

Its just a 12v plug.

Thanks guys!
Should I add a 2nd fuse just to be safe?

[LUKE]

one is enough.

basically,the principle of the type of connection you want to do is the same as in the picture: ...this has only one fuse..