Post by nemesys1 on Feb 7, 2011 14:48:40 GMT -6
Folks,
I think I fixed the problem with the rear jerking a bit when accelerating. I was able to find the swing arm on my JCL MP-250A. Although the bolts were not loose per say, I could turn them with the wrench. I had to use 2 wrenches to tighten them since there was a a nut on the other side. I also tighten another bolt holding a bushing from the swing arm that was bolted to the frame. Again, it was not really loose but I was able to tighten it a bit. I did check every other single bolt I could find. Now, the jerking seems to have disappeared, yay! It seems that the extra bit of tightening did the trick.
I also checked the CVT to see if the main bolt holding it was tighten and it was.
Thanks to all who provided some help. Seems my ride is now back to normal!
I think I fixed the problem with the rear jerking a bit when accelerating. I was able to find the swing arm on my JCL MP-250A. Although the bolts were not loose per say, I could turn them with the wrench. I had to use 2 wrenches to tighten them since there was a a nut on the other side. I also tighten another bolt holding a bushing from the swing arm that was bolted to the frame. Again, it was not really loose but I was able to tighten it a bit. I did check every other single bolt I could find. Now, the jerking seems to have disappeared, yay! It seems that the extra bit of tightening did the trick.
I also checked the CVT to see if the main bolt holding it was tighten and it was.
Thanks to all who provided some help. Seems my ride is now back to normal!
..BAD TO THE BONE..