Certified Clinician
Currently Offline
Posts: 53
Likes: 0
Joined: Jun 13, 2012 10:46:08 GMT -6
|
Post by abispax on Jul 7, 2012 22:53:27 GMT -6
I have used Soda cans they are generally .003 ..from the side of the can...OK for valve gaps if you have nothing else, but feeler guges are like $4.00 thanks,here feeler guges are about 10 dlls,but right now i ran out of cash...will give the can atry.... |
|
Doc's Anything Goes
Currently Offline
Say no to scooter abuse
Posts: 3,873
Likes: 156
Joined: Mar 31, 2010 19:07:16 GMT -6
|
Post by jct842 on Jul 8, 2012 6:38:06 GMT -6
compression check
|
|
Certified Clinician
Currently Offline
Posts: 53
Likes: 0
Joined: Jun 13, 2012 10:46:08 GMT -6
|
Post by abispax on Jul 9, 2012 15:41:03 GMT -6
huge succes, i bought some feelers yesterdy,set the valves to .004 and .005,made sure on the timing,BANG.....scooter started just fine.time for a test drive....will post results later....
|
|
|
|
Post by Alleyoop on Jul 9, 2012 15:52:07 GMT -6
FANTASTIC!! Good job abispax,
tight valves will cause all kinds of problems that make you think it is the Carb. But what it is the valves are tight and stay open a little and you loose compression and makes them hard to start and will not hold low RPMS.
Alleyoop
|
|
Certified Clinician
Currently Offline
Posts: 53
Likes: 0
Joined: Jun 13, 2012 10:46:08 GMT -6
|
Post by abispax on Jul 9, 2012 22:35:56 GMT -6
Test drive went perfect,good speed,smooth,no more oil,looks to me as i did a good job,thank you guys for all the help..... heres a pic of the scoter.... Attachments:
|
|
..BAD TO THE BONE..
