Doc's Anything Goes
Currently Offline
Posts: 2,739
Likes: 66
Joined: Oct 23, 2010 19:29:21 GMT -6
|
Post by tvnacman on Jul 10, 2012 21:34:22 GMT -6
|
|
Scooter Doc
Currently Offline
Posts: 316
Likes: 0
Joined: Feb 28, 2011 12:11:27 GMT -6
|
Post by justbuggin on Jul 10, 2012 21:37:36 GMT -6
i saw a new header next to an old one
|
|
Doc's Anything Goes
Currently Offline
Posts: 2,739
Likes: 66
Joined: Oct 23, 2010 19:29:21 GMT -6
|
Post by tvnacman on Jul 10, 2012 21:45:22 GMT -6
take a closer look look at the flanges .
John
|
|
|
Post by Alleyoop on Jul 10, 2012 21:53:19 GMT -6
Yep the new one looks like 1" Flange and the Old one looks like 1 1/4. Alleyoop
|
|
Doc's Anything Goes
Currently Offline
Posts: 2,739
Likes: 66
Joined: Oct 23, 2010 19:29:21 GMT -6
|
Post by tvnacman on Jul 10, 2012 21:57:53 GMT -6
Al , there is a size difference . But there is more than a size difference . Look more carefully .
John
|
|
|
Post by Alleyoop on Jul 10, 2012 22:05:49 GMT -6
Well there are lots of differences from the new to the old, the part that bolts up to the muffler is bigger it has a piece to mount it welded on from the picture angle it also looks like the holes on the flange on the new one are spaced out more. Also the old one is rusted(HAHA). Alleyoop
|
|
|
Post by Bashan on Jul 11, 2012 12:42:09 GMT -6
Are you repairing your toilet?
|
|
Doc's Anything Goes
Currently Offline
Posts: 2,739
Likes: 66
Joined: Oct 23, 2010 19:29:21 GMT -6
|
Post by tvnacman on Jul 11, 2012 13:27:16 GMT -6
Are you repairing your toilet? no I wanted to change the muffler the engine pipe is rusted too . so i ordered 4 mufflers and one engine pipe . And still waiting . John
|
|
Clinician
Currently Offline
Posts: 16
Likes: 0
Joined: Jun 16, 2012 17:52:41 GMT -6
|
Post by 95civicsi on Jul 11, 2012 22:42:16 GMT -6
Looks like a small hole on the muffler side of the new pipe. Or maybe a spec of dirt on my phone. Idk. Lol
|
|
Scooter Doc
Currently Offline
Posts: 1,936
Likes: 7
Joined: Jun 18, 2010 22:25:14 GMT -6
|
Post by sprocket on Jul 13, 2012 12:39:33 GMT -6
The pipes aren't even close...the bend radius different...
|
|
Doc's Anything Goes
Currently Offline
Posts: 2,739
Likes: 66
Joined: Oct 23, 2010 19:29:21 GMT -6
|
Post by tvnacman on Jul 13, 2012 12:57:05 GMT -6
the engine flange needs to be repositioned counter clock wise some .
John
|
|