No start, no spark, read on...? By jofos (Read 2,391 times)

[Alleyoop]

You need to adjust your fuel ratio mixture it will start much better. You should not have to crank it that much for it to start.

The noise does appear to becoming from the cvt, take a ScrewDriver and touch the tip by the front Variator and your ear on the hanedle and do the same by the clutch. That will pinpoint where the noise is coming from.
Alleyoop

[jofos]

Hello! Just wanted to let you know the noise was caused by the flywheel, or some part of that assembly, not being tightened enough when the stator was replaced. It did cause some damage, but we had the parts to replace it. Scooter is running again!

Thanks again for all the help. Make sure you tighten everything people! hehe

[Alleyoop]

Thank goodness it did not damage the woodruff key slot on the shaft. That would of cost a tear down and a new crank.
Alleyoop