Clinician
Currently Offline
Posts: 1
Likes: 0
Joined: Mar 26, 2013 19:18:56 GMT -6
|
Post by damon1990 on Mar 28, 2013 19:07:03 GMT -6
Hey, we are parts supplier from China. Do both retail business and wholesale business. If any interest, welcome to visit our online shop. www.aliexpress.com/store/218693 :) Thank you. AT MOTOR PARTS |
|
Doc's Anything Goes
Currently Offline
Posts: 2,739
Likes: 66
Joined: Oct 23, 2010 19:29:21 GMT -6
|
Post by tvnacman on Mar 29, 2013 9:36:53 GMT -6
How long is shipping ?
|
|
Clinician
Currently Offline
Posts: 21
Likes: 0
Joined: Oct 19, 2012 18:24:16 GMT -6
|
Post by jeffdeq on Apr 1, 2013 19:05:49 GMT -6
It is a shame that you do not list parts for the GY6-B BN157QMJ engine for scooters with 16 inch wheels....
|
|
|
|
Post by LUKE on Apr 1, 2013 19:21:22 GMT -6
if you beat tvnacman's shipping time and cost... i will order from you promise!
|
|
Doc's Anything Goes
Currently Offline
Posts: 2,739
Likes: 66
Joined: Oct 23, 2010 19:29:21 GMT -6
|
Post by tvnacman on Apr 2, 2013 18:36:07 GMT -6
It is a shame that you do not list parts for the GY6-B BN157QMJ engine for scooters with 16 inch wheels.... What were you looking for ? I have some parts for the 16" wheel scooters . I'm working on building inventory for that . John |
|
Clinician
Currently Offline
Posts: 21
Likes: 0
Joined: Oct 19, 2012 18:24:16 GMT -6
|
Post by jeffdeq on Apr 3, 2013 10:36:40 GMT -6
I have a Lance Phoenix 150 (ZN150T-18,150cc) and a BMS Pathfinder 200 (174cc). They are not rare scooters, just not as common as the standard GY6 bikes. This engine has a 57mm head bolt/stud arrangement. It also has a taller head (3"). Parts like the head gasket and cylinder gasket only seem to be available in the rebuild kits found at only one source on the big auction site. The rebuild kits are only for 57mm pistons. There are no over bore kits available for the GY6-B engines. If I were ever to rebuild the Pathfinder 200 I do not think I would be able to find 62mm top end parts. I have read that these type of parts are available in Asia but there is no distributors here in the states carrying them. Also, it is difficult to find variator weights for the CVT.
All in all, the 16" bikes are great to own, however replacement/spare parts are limited.
Thanks for your reply. I hope you take an interest in providing parts for 16" scooters.
|
|
|
|
Post by Alleyoop on Apr 3, 2013 11:34:55 GMT -6
What size are the weights on that Variator. I believe they have the 250cc 123mm Variator and Clutch setup. If it does measure the weights they are probably something like 20x12s. Different size weights are available all over the place so that will not be a problem.
Alleyoop
|
|
Clinician
Currently Offline
Posts: 47
Likes: 0
Joined: Apr 6, 2010 12:00:31 GMT -6
|
Post by jdikov on Jun 7, 2013 19:39:53 GMT -6
I carry all the parts for the ZNEN scoots with 16" wheels. It is one of the scoots we import so I have to stock parts for it.
|
|
Doc's Anything Goes
Currently Offline
Posts: 2,739
Likes: 66
Joined: Oct 23, 2010 19:29:21 GMT -6
|
Post by tvnacman on Jul 14, 2013 16:58:08 GMT -6
What size are the weights on that Variator. I believe they have the 250cc 123mm Variator and Clutch setup. If it does measure the weights they are probably something like 20x12s. Different size weights are available all over the place so that will not be a problem. Alleyoop 20x15 12g John |
|
..BAD TO THE BONE..
