Senior Clinician
Currently Offline
Posts: 222
Likes: 4
Joined: Mar 26, 2013 16:50:01 GMT -6
|
Post by jjoshua20213 on May 23, 2013 7:38:15 GMT -6
Can I use sliders and rollers in my variator?
|
|
Scooter Doc
Currently Offline
Posts: 1,319
Likes: 5
Joined: Feb 17, 2011 19:36:47 GMT -6
|
Post by mike6736 on May 23, 2013 9:00:34 GMT -6
Yes you can... I think sliders work the best, but is just my choice...
Magoo
|
|
Senior Clinician
Currently Offline
Posts: 222
Likes: 4
Joined: Mar 26, 2013 16:50:01 GMT -6
|
Post by jjoshua20213 on May 23, 2013 11:10:17 GMT -6
I mean mix in the sliders and rollers at the same time
|
|
|
|
Post by LUKE on May 23, 2013 11:53:15 GMT -6
I mean mix in the sliders and rollers at the same time omfg, i won't take the risk..the CVT might get confused wether to slide or roll  answer is nope! the simple explanation here is that the weights SHOULD slide or roll ALL AT THE SAME time(not a point of a second delayed), the the rollers might roll faster than slider does slide. so go ef' figure bud! yah know...it's physics! ask magoo!  |
|
Senior Clinician
Currently Offline
Posts: 172
Likes: 1
Joined: May 1, 2013 15:19:06 GMT -6
|
Post by dragonsparks on May 23, 2013 15:30:53 GMT -6
I mean mix in the sliders and rollers at the same time omfg, i won't take the risk..the CVT might get confused wether to slide or roll answer is nope! the simple explanation here is that the weights SHOULD slide or roll ALL AT THE SAME time(not a point of a second delayed), the the rollers might roll faster than slider does slide. so go ef' figure bud! yah know...it's physics! ask magoo! Luke ,I guess you've never heard of the K mod. jjoshua20213 Yes you can, You just have to alternate 1slider-1roller-1slider-1roller-1slider-1roller. Dave |
|
Senior Clinician
Currently Offline
Posts: 222
Likes: 4
Joined: Mar 26, 2013 16:50:01 GMT -6
|
Post by jjoshua20213 on May 23, 2013 22:36:43 GMT -6
I went for it and it works. Just needed slightly heavier weights. I got 4g sliders... Too light, wastes gas by the engine running at a higher rpm. I mixed in stock (6.3g) with the sliders with success.
|
|
Senior Clinician
Currently Offline
Posts: 172
Likes: 1
Joined: May 1, 2013 15:19:06 GMT -6
|
Post by dragonsparks on May 24, 2013 6:06:07 GMT -6
I went for it and it works. Just needed slightly heavier weights. I got 4g sliders... Too light, wastes gas by the engine running at a higher rpm. I mixed in stock (6.3g) with the sliders with success. Way to go or Get er dun there jjoshua...  Ya made your own version of the k-mod.  Dave |
|
...
...
...
