Clinician
Currently Offline
Posts: 3
Likes: 0
Joined: Apr 28, 2013 12:38:17 GMT -6
|
Post by charleslee1 on Sept 5, 2013 10:59:02 GMT -6
Good Day, This is my first post and I need advice. I have a 2010 Tao Tao 150. It ran just fine until a few days ago. I took a short ride, parked it and upon returning all electrical components were dead-------starter switch, horn, fuel gauge, all lights. I found the fuse beside the battery blown and replaced it. Still no go. Thus far, I have replaced both fuses (the battery location and another under plastic) tested the ignition switch per this thread scooterdoc.proboards.com/index.cgi?board=electrical&action=display&thread=1470, checked all grounds and they seem to be good, charged and tested the battery. Is there another fuse that I am missing? What other diagnostics can I do?
|
|
Clinician
Currently Offline
Posts: 36
Likes: 0
Joined: Dec 26, 2012 3:08:23 GMT -6
|
Post by bailey on Sept 5, 2013 12:04:02 GMT -6
kill switch ?
|
|
Clinician
Currently Offline
Posts: 3
Likes: 0
Joined: Apr 28, 2013 12:38:17 GMT -6
|
Post by charleslee1 on Sept 5, 2013 12:12:55 GMT -6
bailey, Thank you for your replay. This model does not have a kill switch. The kill switch is in the key switch, unless i am missing something.
|
|
Clinician
Currently Offline
Posts: 3
Likes: 0
Joined: Apr 28, 2013 12:38:17 GMT -6
|
Post by charleslee1 on Sept 6, 2013 15:45:07 GMT -6
Great news!!!! Found the problem.. Broken wire on the hot side of the fuse wire under the crowl.
Charleslee1
|
|