Senior Clinician
Currently Offline
Posts: 107
Likes: 1
Joined: Sept 25, 2013 16:14:54 GMT -6
|
Post by bobthetechguy on Oct 2, 2013 9:08:12 GMT -6
Burned up the bearings and can't get this one last one off the shaft. Attachments:
|
|
Senior Clinician
Currently Offline
Posts: 107
Likes: 1
Joined: Sept 25, 2013 16:14:54 GMT -6
|
Post by bobthetechguy on Oct 2, 2013 13:48:17 GMT -6
Well that escalated quickly. The bearing is so seized it welded itself to the shaft. I took the shaft to a machine shop to try to pop it off with a press and it didn't work..
Looks like I'll be getting a new shaft off eBay asap.
|
|
Certified Clinician
Currently Offline
Posts: 96
Likes: 0
Joined: Jul 26, 2013 15:36:38 GMT -6
|
Post by scooterbob on Oct 2, 2013 19:23:33 GMT -6
Might as well hammer it off and see what the shaft looks like. If need be heat the bearing up.
|
|
Senior Clinician
Currently Offline
Posts: 107
Likes: 1
Joined: Sept 25, 2013 16:14:54 GMT -6
|
Post by bobthetechguy on Oct 2, 2013 21:00:01 GMT -6
Already tried hammering away at it.
Took it to a machine shop and they tried to press it out and that didn't work.Took a grinder to it to try to cut it off and that didn't work, it is pretty firmly welded to the shaft And I'm just Bonn I've to order a new shaft tomorrow.
|
|
Certified Clinician
Currently Offline
Posts: 96
Likes: 0
Joined: Jul 26, 2013 15:36:38 GMT -6
|
Post by scooterbob on Oct 2, 2013 22:20:55 GMT -6
I was going to suggest a high speed grinder with a cut off wheel on it. I've cut some hard metal with one.
|
|
