electrical problems taotao 50 By bobthetechguy (Read 5,328 times)

[bobthetechguy]

My 2010 taotao 50 peace motorsports is having electrical problems. Sometimes it won't crank. I'll press the button and nothing happens. If I turn the key off and back on a couple times it works fine. The guages light up and fuel level comes on just fine.

Also now my headlight doesn't work. At first the low beam side went out and I could just switch it to high beam and it would work. Now I have no headlight at all. The blue light in the guage cluster still lights up to indicate when high beam is activated if that makes any difference.

This really sucks as I dont have a kick start lever on my scooter(PO removed it for some reason)

[Deleted]

about the headlight: have you changed the bulb? if it was the original bulb, it could have just been on its way out.

[tvnacman]

check the " AC voltage at the head light "
check the starter switch makes good ground .
check to see if the brake light is lit when trying to start .
power to the coil of the solenoid comes off the brake light ckt and ground comes from the starter switch .
As far as the headlight bulb they could be defective , however if the AC voltage spikes it will burn them out .

Questions ?

John

[bobthetechguy]

So just found out turning the ignition on and off doesn't help. But I have to fiddle with the starter button. I'm assuming its loose wiring after riding some bumpy roads yesterday. Will tear it down tomorrow and check.

As for the light is there anything brighter I can put in there that will fit without mods? The stock light is just too dim for these country roads..

[bobthetechguy]

Yes brake light is lit when trying to start, as is the running lights , and blinkers if i activate them.

[tvnacman]

Trace from the - battery to the frame , there should be a few wires under that point . Take that apart clean the underside for good electrical connection . Follow the other wires from the past point and see where they connect and clean the connections . I'm a big fan of adding good wire to aid the stock harness . Some will add a wire from - battery to the valve cover inserted under a bolt , then continue on to the area under the handle bars and splice to the green on the ignition switch . I also pull a heavy wire via a fuse from the battery + to the ignition switch red wire .

John

[bobthetechguy]

What's the brightest headlight(better than stock) I can put in there?

[mikey34]

It depends on your Bulb Connection. If its a two point connection on the bulb, I have seen as high as 55watts, but thats it. I just bought a pair of 20 dollar fog lights from Advance Auto Parts, so I could direct them where I want. They're alot bigger and brighter and they make my scoot look like a Ruckus hahaha

[bobthetechguy]

Ended up getting a stock replacement from local shop. It was cold, raining and getting dark early . someday I wanna get some super bright LEDS.

[tvnacman]

cree

John

[Bashan]

Oct 15, 2013 3:30:50 GMT -6 tvnacman said:

cree

Geez John, I didn't know you had American Indian heritage. You're a trip buddy.

[tvnacman]

I mention Cree led, nothing besides Cree led.

John

[bobthetechguy]

I'm also native American Indian also.

[tvnacman]

Oct 15, 2013 13:17:19 GMT -6 bobthetechguy said:

I'm also native American Indian also.

I only see a person posting for help . Sex race color creed I don't see or makes any difference . Clean grammer and respect is what matters .

I was unaware cree has anything to do with indian . Yes cree led's are the brightest .

John

[Alleyoop]

And here I thought you meant to type Great and missed a few key strokes (HAHA).
Alleyoop