Starter clutch, GRRRRRRR! By yomo (Read 331 times)

[yomo]

Hi all.

Well, here I am with scooter trouble again.

I have 2008 250cc eurospeed and It will not start, I came to the conclusion that it's the starter clutch.

I started to disassemble it but I can not remove the clutch itself, I removed the nut and used a puller but it will not cooperate.
Any ideas?

Thanx

Yomo

[Alleyoop]

You check This thread out you do know there is a WOODRUFF key on the shaft that it has to line up with a slot on it in order for it come out.
Alleyoop

www.scooterdoc.proboards.com/index.cgi?board=techtips&action=display&thread=6884&page=1

[yomo]

Thanks for the response, great thread but mine is slightly different.

I will take a couple of pictures.

thanks again

[Alleyoop]

Great!! Pictures help a lot because there are so many different types of parts on the different motors.
Alleyoop