Head lamp bulbs By kalee (Read 2,597 times)

[kalee]

Alley, is there a certain location that all the light wires come together, all my wires run down the right side of the bike and I'm minus left front signal light and right front park light.I hate to sound dumb but where would my stator be an how would I tell how many poles I have?
kalee

[tvnacman]

Maybe you might want to do the 11 pole conversion ?

John

[Alleyoop]

May 3, 2014 16:30:03 GMT -6 kalee said:

Alley, is there a certain location that all the light wires come together, all my wires run down the right side of the bike and I'm minus left front signal light and right front park light.I hate to sound dumb but where would my stator be an how would I tell how many poles I have?
kalee

they are up in front under the front cowl. Your stator is on the right side behind the motor cooling fan. You have to take the black shroud off then the fan then the FLYWHEEL the FLYWHEEL fits over the stator.
Alleyoop

[kalee]

John the two on the left of the picture are like mine, how do I order a pair of them from you ?

kalee

[kalee]

I dont have a cooling fan on my trike, got any Idea's on my light problem's Alley ?
kalee

[Alleyoop]

May 3, 2014 19:57:18 GMT -6 kalee said:

I dont have a cooling fan on my trike, got any Idea's on my light problem's Alley ?
kalee

If you have a 150cc or 50cc TRIKE YOU MOST CERTAINLY do have a cooling fan. If you have a 250 or 300cc then you don't?




As far as the lights are concerned did you replace the bulbs? Do this switch the bulbs from the ones that are working if they light then get two new bulbs. If not jiggle the wires and or the bulb in the sockets they sometimes come loose and do not make contact inside the socket.
Alleyoop

[tvnacman]

Send me a pm or call .



John

[kalee]

May 3, 2014 20:36:26 GMT -6 Alleyoop said:

May 3, 2014 19:57:18 GMT -6 kalee said:

I dont have a cooling fan on my trike, got any Idea's on my light problem's Alley ?
kalee

If you have a 150cc or 50cc TRIKE YOU MOST CERTAINLY do have a cooling fan. If you have a 250 or 300cc then you don't?




As far as the lights are concerned did you replace the bulbs? Do this switch the bulbs from the ones that are working if they light then get two new bulbs. If not jiggle the wires and or the bulb in the sockets they sometimes come loose and do not make contact inside the socket.
Alleyoop

By golly Alley your right, there is a cooling fan inside that black housing I learned something new today. I guess I had never paid any attention to it before. What kind of engine oil do you use in your trike ?
kalee

[kalee]

I guess I'm going to have to strip the front end and see if I can chase down the problem on these lights. They might have been like this to start out with but I was pretty sure they were working.
kalee

[kalee]

May 4, 2014 7:18:38 GMT -6 kalee said:

I guess I'm going to have to strip the front end and see if I can chase down the problem on these lights. They might have been like this to start out with but I was pretty sure they were working.
kalee

The problem with my lights was ME, there are two female plugs at the front of my trike so this morning I started chasing colors and discovered I had plugged the turn signal wire into the wrong female receptecal now I have both turn signals. The front lower lights on my trike are for turn signal's only.

kalee

[tvnacman]

Great you figured it out !!!!!!!

John

[kalee]

I would like to have a pair of those led's for my trike John, I will give you a call tommorow some time
kalee

[kalee]

John did you find out what number of gear oil is in the gear box on a 150Cc trike?

kalee

[Alleyoop]

Put in 80W90 for the gear oil, 10w40 for you crankcase oil.
Alleyoop

[kalee]

Would that be synthetic Alley ?
kalee