Post by anarchy on Feb 23, 2021 0:57:06 GMT -6
I have a 2020 Wolf EX-150. I rode it all the time and never had any issues. Changed the oil a few times, but haven't done any major work to it. One night I heard a little sputter sound as I was driving but it didn't effect it immediately. About 2 miles down the road, the RPMs dropped and it died.
It hasn't been able to "go" since then. It will start and idle perfectly. But if I get on it and give it has itll almost immediately drop RPM and just sputter and slightly jerk like it's getting a good push but not enough to go. I can let off the throttle and it'll go back to idling just fine.
I've drained the gas that was in it originally. Checked my valve clearance.
Completely cleaned the carburetor including the jets.
Checked all my hoses.
Cleaned the air filter.
I am at a loss and I don't know what to do.
The carb does have a cap on the air/fuel screw so I haven't tried that. I was going to see if anyone could help before I did that.
So, any ideas?
It hasn't been able to "go" since then. It will start and idle perfectly. But if I get on it and give it has itll almost immediately drop RPM and just sputter and slightly jerk like it's getting a good push but not enough to go. I can let off the throttle and it'll go back to idling just fine.
I've drained the gas that was in it originally. Checked my valve clearance.
Completely cleaned the carburetor including the jets.
Checked all my hoses.
Cleaned the air filter.
I am at a loss and I don't know what to do.
The carb does have a cap on the air/fuel screw so I haven't tried that. I was going to see if anyone could help before I did that.
So, any ideas?