Clinician
Currently Offline
Posts: 24
Likes: 0
Joined: Mar 24, 2012 10:07:27 GMT -6
|
Post by jotrike2011 on Apr 1, 2012 11:21:54 GMT -6
Hello Alleyoop
I wonder if after installing the MAIN JET #122,5
and PILOT JET #38 had to make some other adjustment?
thanks
Jordi
|
|
Clinician
Currently Offline
Posts: 24
Likes: 0
Joined: Mar 24, 2012 10:07:27 GMT -6
|
Post by jotrike2011 on Mar 31, 2012 15:04:40 GMT -6
|
|
Clinician
Currently Offline
Posts: 24
Likes: 0
Joined: Mar 24, 2012 10:07:27 GMT -6
|
Post by jotrike2011 on Mar 31, 2012 9:57:26 GMT -6
Hello
concerning my carburetor PD24J carry a 24 mm
and with reference to Final Gear set, the set of 17/37 and sold it and do not know if it will return to take
H.. And seen these other
14/38, 15/36, 16/36, 17/36 and 18/37 and I have no idea if I could get a good combination
what I like is that the scooter was not as if it can be revolutionized and gain some speed but without losing much strength in the output.
Or would be better to wait until they return to the 17/37
thanks
Jordi
PS: And thanks for the photo of the carburettor
|
|
Clinician
Currently Offline
Posts: 24
Likes: 0
Joined: Mar 24, 2012 10:07:27 GMT -6
|
Post by jotrike2011 on Mar 30, 2012 5:21:24 GMT -6
Hello Alleyoop
the Main Jet and Pilot Jet must be of a specific brand
thanks
Jordi
|
|
Clinician
Currently Offline
Posts: 24
Likes: 0
Joined: Mar 24, 2012 10:07:27 GMT -6
|
Post by jotrike2011 on Mar 29, 2012 19:09:56 GMT -6
Hello Alleyoop
I'm not clear from this comment
# 38 pilot and main jet # 122.5 to 125
meaning
I know there is one long and one small
thanks
Jordi
|
|
Clinician
Currently Offline
Posts: 24
Likes: 0
Joined: Mar 24, 2012 10:07:27 GMT -6
|
Post by jotrike2011 on Mar 29, 2012 8:30:52 GMT -6
hello alleyoop so says deveria put a 17/37 right? not clear to me that I could use Main Jet and I do not recommend or carburetor Intake manifold or the Aluminum. Regarding the tires here in Spain there are none, I found a German page with the same measure that I have, and the pages of USA do shipments to Spain and the shipping is very expensive, not to mention that as I said I would come into the space that now I have My trike in the table has to measure rpms and with respect to the speed down a bit I've put 95KMH and if I stretch a little more like the 100KMH grabs me. I leave you some links where it leaves the drive and the clutch that I have installed the drive www.drpulley.info/shop/product_info.php?products_id=745sliders www.drpulley.info/shop/product_info.php?products_id=511the clutch www.drpulley.info/shop/product_info.php?products_id=398According to the manufacturer recommends weighing 10-15% underweight or equal weight origuinal origuinal. I currently carry the 9g but you'll put the next review of 10g is the weight on his home in this way as something grabs me more speed and if you change gears for even better I have a question every few miles you change the engine oil to 700Km I put 100% synthetic oil good now I almost 2000km Jordi |
|
Clinician
Currently Offline
Posts: 24
Likes: 0
Joined: Mar 24, 2012 10:07:27 GMT -6
|
Post by jotrike2011 on Mar 28, 2012 17:03:29 GMT -6
Hello again after the presentation of my trike I open this thread for my technical questions about the GY6 200cc one in particular, according to data sheet G-161QML 189cc rear tires 235/30/12 Comment input any edits 1 Drive Dr.Pulley with sliders 10g 9g soon 2 Clutch Dr.Pulley with the factory settings + Performance Torque Spring 1500 RPM 3 CDI Naraku 4 spark plug wire coil + Naraku Iridium Spark 5 6 dual-layer foam air filter PIT BIKE of www.marchaldfilters.com/webcontent/after/pit.html7 EBC-HH pads front My intention is to continue improving and better off when I saw these components and I would like to know your opinion on the matter GY6 Engine Gear Sets with different sizes and this is my big question, knowing that combination to choose. The forum mate alleyoop carries a set of 16/37 but do not know if carrying wheels 12 "instead of 10" will be the perfect combination, I want to win some top speed and the scooter will not I guess so revolutionized and image will be 13/40 as the trike alleyoop I have located on eBay this measures 17/37, 16/38 and 17/36 If I change the original carburetor 24mm 30mm GY6 CVK this Carburetor but the GY6 Performance Intake would have a benefit or a waste and would be best to change the Main Jet by other oversized for now nothing more forgiven for the extension of my office thanks Jordi PD:He forgot to ask you how often you change oil Trike? Attachments:
|
|
Clinician
Currently Offline
Posts: 24
Likes: 0
Joined: Mar 24, 2012 10:07:27 GMT -6
|
Post by jotrike2011 on Mar 24, 2012 17:53:50 GMT -6
if correct
is a 200cc trike
|
|
Clinician
Currently Offline
Posts: 24
Likes: 0
Joined: Mar 24, 2012 10:07:27 GMT -6
|
Post by jotrike2011 on Mar 24, 2012 10:13:56 GMT -6
I'm George and I have this trike scooter WJ200ST-6 from September a greeting Jordi Attachments:
|
|
