Scooter Doc
Currently Offline
Mission Tx.
Posts: 344
Likes: 3
Joined: Feb 24, 2013 8:45:49 GMT -6
|
Post by kalee on Jun 6, 2013 11:55:26 GMT -6
rapidjim, I have a 2012 Ice Bear trike pst 150cc-11, would the front coweling be removed the same way as the pictures you have listed in Trikers Alley( topic: Sample Of Manual ) Nov. 1 2010 result #7? I have a bad vibration rattle under the front coweling when I go to take off and I'm thinking it's either around the head lights or something is loose under the front coweling. I would post a picture of my trike but have not had any luck doing that. I have one in photobucket but I'm still unable to transfer it to Scooter Doc. Thank you for your time kalee
|
|
Scooter Doc
Currently Offline
Mission Tx.
Posts: 344
Likes: 3
Joined: Feb 24, 2013 8:45:49 GMT -6
|
Post by kalee on Jun 2, 2013 9:25:37 GMT -6
This is a little late after the fact Alleyoop, I picked up my yy250cc from the Honda dealer and they never did tell me what they found and it still wouldnt run when i picked it up. After I got home pulled the spark plug tested it, it was firing in the wrong place replaced the spark plug and it ran ok.I'm thinking by the way the starter sounds that the Honda dealer has adjusted the valves using a compression gauge, But they never did tell me that.I have since traded the yy250cc for a 150cc-11 Ice Bear cruiser trike and have only 60 miles on it and its runin great. THANKS again for all your info. kalee
|
|
Scooter Doc
Currently Offline
Mission Tx.
Posts: 344
Likes: 3
Joined: Feb 24, 2013 8:45:49 GMT -6
|
Post by kalee on May 12, 2013 8:52:59 GMT -6
Really nice rebuild jeffdeq, Injoy the ride kalee
|
|
Scooter Doc
Currently Offline
Mission Tx.
Posts: 344
Likes: 3
Joined: Feb 24, 2013 8:45:49 GMT -6
|
Post by kalee on May 4, 2013 13:19:13 GMT -6
Thanks alleyoop for the info kalee
|
|
Scooter Doc
Currently Offline
Mission Tx.
Posts: 344
Likes: 3
Joined: Feb 24, 2013 8:45:49 GMT -6
|
Post by kalee on May 4, 2013 13:12:02 GMT -6
Nice machine
|
|
Scooter Doc
Currently Offline
Mission Tx.
Posts: 344
Likes: 3
Joined: Feb 24, 2013 8:45:49 GMT -6
|
Post by kalee on May 4, 2013 11:34:26 GMT -6
Is there such a thing as a reverse kit for a standard three wheel trike? kalee
|
|
Scooter Doc
Currently Offline
Mission Tx.
Posts: 344
Likes: 3
Joined: Feb 24, 2013 8:45:49 GMT -6
|
Post by kalee on Apr 29, 2013 19:12:08 GMT -6
Your right royldoc red paint do make them go faster kalee
|
|
Scooter Doc
Currently Offline
Mission Tx.
Posts: 344
Likes: 3
Joined: Feb 24, 2013 8:45:49 GMT -6
|
Post by kalee on Apr 24, 2013 9:36:24 GMT -6
alleyoop, I have since found out the 250cc trike I was talking about turns out to be a 150cc. and the reverse lever is under the left handle bar. The guy she purchased the trike from told her it was a 250cc but I found out its a 150cc, and ( i'm not going to be the one to tell her any difference ) she is to be happy with it. kalee
|
|
Scooter Doc
Currently Offline
Mission Tx.
Posts: 344
Likes: 3
Joined: Feb 24, 2013 8:45:49 GMT -6
|
Post by kalee on Apr 20, 2013 13:58:38 GMT -6
thanks alleyoop for the info. kalee
|
|
Scooter Doc
Currently Offline
Mission Tx.
Posts: 344
Likes: 3
Joined: Feb 24, 2013 8:45:49 GMT -6
|
Post by kalee on Apr 17, 2013 18:35:56 GMT -6
Thanks alleyoop for your input kalee
|
|
Scooter Doc
Currently Offline
Mission Tx.
Posts: 344
Likes: 3
Joined: Feb 24, 2013 8:45:49 GMT -6
|
Post by kalee on Apr 17, 2013 7:39:51 GMT -6
Thanks Luke for your input, I have also read on this forum about a front three wheeler having wobble in the front that wouldnt be to good either. kalee
|
|
Scooter Doc
Currently Offline
Mission Tx.
Posts: 344
Likes: 3
Joined: Feb 24, 2013 8:45:49 GMT -6
|
Post by kalee on Apr 16, 2013 7:38:01 GMT -6
I have been told that the two wheels in front still have to balance like the two wheelers, where as the two wheels in back will stand by itself. Something to think about I guess,I think I would like the two wheels in back better, I know you would have to steer it like a tricycle no leaning.
|
|
Scooter Doc
Currently Offline
Mission Tx.
Posts: 344
Likes: 3
Joined: Feb 24, 2013 8:45:49 GMT -6
|
Post by kalee on Apr 16, 2013 7:29:25 GMT -6
WOW, alleyoop thats a very nice setup you have, Thanks for the info. kalee
|
|
Scooter Doc
Currently Offline
Mission Tx.
Posts: 344
Likes: 3
Joined: Feb 24, 2013 8:45:49 GMT -6
|
Post by kalee on Apr 15, 2013 19:39:31 GMT -6
Alleyoop, I hate to sound dumb but what does the PST 150H stand for on your trike. The 150 is 150cc, I have looked at several trike's and have not seen the pst or H.
|
|
Scooter Doc
Currently Offline
Mission Tx.
Posts: 344
Likes: 3
Joined: Feb 24, 2013 8:45:49 GMT -6
|
Post by kalee on Apr 15, 2013 18:09:52 GMT -6
That is a neat three wheeler Honda has, I have never saw one like it. Thanks Alley & Bashan for your input. If I do get a 150cc trike I will have to get some info from Alley so I can do some minor mods. Alley could you tell me what all you have done to your trike to speed it up? kalee
|
|