Clinician
Currently Offline
Posts: 4
Likes: 0
Joined: May 6, 2013 15:39:07 GMT -6
|
Post by wwiillburr on Jun 18, 2013 7:40:44 GMT -6
Yeah, he doesn't have the part I need... I've looked there.
Thanks,
|
|
Clinician
Currently Offline
Posts: 4
Likes: 0
Joined: May 6, 2013 15:39:07 GMT -6
|
Post by wwiillburr on Jun 17, 2013 19:10:38 GMT -6
I have looked EVERYWHERE for parts for a handsome boy Type 2 scooter (certain styles of Peace VIP future champion 50cc, TAO TAO Powermax 150cc), and cannot for the life of me, find the correct front side panels for my scooter: www.killermotorsports.com/v/vspfiles/photos/tt-powermax150-2T.jpgWhat I'm looking for if you look at the link, is the side panels going down from the front headlight to the floorboard on each side. Can anyone point me in the right direction? Thanks a bunch! Edit: The type 1 (most handsome boys), have a different front panel with a different lighting arrangment. |
|
Clinician
Currently Offline
Posts: 4
Likes: 0
Joined: May 6, 2013 15:39:07 GMT -6
|
Post by wwiillburr on May 20, 2013 6:20:42 GMT -6
Thank you everyone!
The ignition was wired incorrectly to the 4 pin. A quick rearrangement of the pins and I am good! Scooter starts
|
|
Clinician
Currently Offline
Posts: 4
Likes: 0
Joined: May 6, 2013 15:39:07 GMT -6
|
Post by wwiillburr on May 17, 2013 7:47:23 GMT -6
I'm fixing my girlfriend's 50cc Peace VIP champion scooter. It was stolen from her residence and recovered 2 weeks later by the police.
The thief removed the ignition. I have put an ignition back on, and the ignition correctly stops the bike from running, but the electric starter is not starting the bike. Kickstarting the bike works correctly, the killswitch will also kill the bike.
I believe the thief hotwired part of the bike. I have one black lead coming from the battery, but oddly 2 red leads coming off the positive terminal. One goes up the right hand frame to what looks like a relay, and the other has a fuse (which is burnt, and when I replace and turn the ignition on, blows immediately) which goes into the wiring harness.
Can anyone shed light on this?
Thanks!
|
|
