Clinician
Currently Offline
Posts: 20 
Likes: 2
Joined: Sept 6, 2014 18:47:07 GMT -6
|
Post by mrgibbles on Sept 7, 2014 17:11:03 GMT -6
not sure if this is a problem but when i first start my scooter it idles at around 1200 rpm but after i drive around it warms up it idles at around 1900 it should be at 1900 idle just curious why it would be low when it is first started
scooter is jonway yy150t-12 150cc
|
|
Scooter Doc
Currently Offline
Triangular Shaped Head!!
Posts: 437
Likes: 8
Joined: May 24, 2013 21:16:22 GMT -6
|
Post by FACE PLANT FOR LIFE on Sept 7, 2014 21:00:23 GMT -6
That is very odd indeed. I can't personally think of anything that would do that. Your enrichener should have the RPM's higher when you first start the bike, not the other way around. Maybe your valves are a tad too tight and when they warm up and expand it starts to run better, leading to a higher RPM. That's my best guess.
|
|
|
|
Post by Bashan on Sept 7, 2014 21:44:36 GMT -6
Maybe the enricher isn't working? Plant has a good point though. Rich
|
|
Clinician
Currently Offline
Posts: 20
Likes: 2
Joined: Sept 6, 2014 18:47:07 GMT -6
|
Post by mrgibbles on Sept 10, 2014 9:57:08 GMT -6
Checked my oil it was little high drained some out with a straw seems that fixed the idle incase anyo e else had same problem that could be why also getting better top speed again now also seems was to much pressure because of the oil level glad I checke and for top speed I backed off at 68 could have gone faster but kinda squirrel y on those little tires past 70
|
|
