Certified Clinician
Currently Offline
Posts: 69 
Likes: 0
Joined: Jan 15, 2015 13:43:13 GMT -6
|
No spark.
by: chtmatthew - Mar 7, 2015 17:06:34 GMT -6
Post by chtmatthew on Mar 7, 2015 17:06:34 GMT -6
Got it! Hard to get started, and when it does start... sounds bad.
|
|
|
|
No spark.
by: cyborg - Mar 7, 2015 18:02:50 GMT -6
via mobile
Post by cyborg on Mar 7, 2015 18:02:50 GMT -6
Time to change engines,,,
|
|
Certified Clinician
Currently Offline
Posts: 69
Likes: 0
Joined: Jan 15, 2015 13:43:13 GMT -6
|
No spark.
by: chtmatthew - Mar 7, 2015 18:06:35 GMT -6
Post by chtmatthew on Mar 7, 2015 18:06:35 GMT -6
Though so, my other engine is the kind you have to mix oil yourself in the gas tank.. as it has now spot for the oil on the right or anywhere...
|
|
|
|
No spark.
by: cyborg - Mar 7, 2015 18:18:53 GMT -6
via mobile
Post by cyborg on Mar 7, 2015 18:18:53 GMT -6
It's a two stroke?
|
|
Certified Clinician
Currently Offline
Posts: 69
Likes: 0
Joined: Jan 15, 2015 13:43:13 GMT -6
|
No spark.
by: chtmatthew - Mar 7, 2015 18:52:17 GMT -6
via mobile
Post by chtmatthew on Mar 7, 2015 18:52:17 GMT -6
|
|
|
|
No spark.
by: Alleyoop - Mar 7, 2015 20:18:10 GMT -6
Post by Alleyoop on Mar 7, 2015 20:18:10 GMT -6
You better check that 2 stroke motor they usually have the mounts on the bottom of the motor the 4 strokes have the motor mounts on top. If so it will not be a swap.
Also that motor is loosing compression badly. Have you checked to make sure it is timed and the flywheel woodruff key was not sheared and is way out of time. Have you checked the compression on it,
I can hear the compression being let out. Is the plug hole stripped or anything. Have you checked the valves and make sure they are sealing.Alleyoop
|
|
Certified Clinician
Currently Offline
Posts: 69
Likes: 0
Joined: Jan 15, 2015 13:43:13 GMT -6
|
No spark.
by: chtmatthew - Mar 8, 2015 9:15:29 GMT -6
via mobile
Post by chtmatthew on Mar 8, 2015 9:15:29 GMT -6
You better check that 2 stroke motor they usually have the mounts on the bottom of the motor the 4 strokes have the motor mounts on top. If so it will not be a swap. Also that motor is loosing compression badly. Have you checked to make sure it is timed and the flywheel woodruff key was not sheared and is way out of time. Have you checked the compression on it, I can hear the compression being let out. Is the plug hole stripped or anything. Have you checked the valves and make sure they are sealing.Alleyoop I'll check it out tomorrow. Thanks for the feedback  |
|
..BAD TO THE BONE..
