Clinician
Currently Offline
Posts: 43
Likes: 1
Joined: Apr 23, 2010 16:15:15 GMT -6
|
Post by barry on Jun 3, 2016 15:51:56 GMT -6
My brake and turn signal work but all other lights are off. I checked the fuse and I did have 1 bad fuse. It's funny because after I changed that fuse (twice), nothing changed. Then what did that fuse do in the first place and where did my lights go...? I'm really stumped. The fuse box works fine..
|
|
Doc's Anything Goes
Currently Offline
Say no to scooter abuse
Posts: 3,873
Likes: 156
Joined: Mar 31, 2010 19:07:16 GMT -6
|
Post by jct842 on Jun 3, 2016 21:03:00 GMT -6
Get out your meter and start tracing using the electrical diagrams in the library. You may have a bad connector.
|
|
Clinician
Currently Offline
Posts: 43
Likes: 1
Joined: Apr 23, 2010 16:15:15 GMT -6
|
Post by barry on Jun 4, 2016 14:13:20 GMT -6
thanks jct842,
There's a Library here..?
|
|
|
|
Post by cyborg on Jun 4, 2016 15:23:04 GMT -6
Yes there's extensive wire diagrams in the library,,,please check the hi/lo switch first,,it may be a problem there
|
|
Senior Clinician
Currently Offline
Posts: 208 
Likes: 16
Joined: Apr 12, 2016 19:26:00 GMT -6
|
Post by blu on Jun 4, 2016 15:43:32 GMT -6
Where is the library?
|
|
Doc's Anything Goes
Currently Offline
Say no to scooter abuse
Posts: 3,873
Likes: 156
Joined: Mar 31, 2010 19:07:16 GMT -6
|
Post by jct842 on Jun 4, 2016 20:05:00 GMT -6
go down on the home page! near bottom
|
|
|
|
Post by crwford on Jun 5, 2016 12:00:41 GMT -6
I think if you remove front panel and check all the connections. One set is not tight enough. On my wife trike the red one I put on zip ties through, all the connections to keep them tight. I plan to do so on my other trikes  |
|
