Senior Clinician
Currently Offline
Posts: 181 
Likes: 2
Joined: Jan 10, 2016 0:49:57 GMT -6
|
Post by thxcuz on Jan 30, 2017 11:44:47 GMT -6
 New to me xingyue ita 150 Rust in the cylinder. Can it be removed or do I need a new cylinder? |
|
|
|
Post by cyborg on Jan 30, 2017 13:11:39 GMT -6
It's new cylinder /piston assembly time,,, how's the crank look?,,
|
|
|
|
Post by cyborg on Jan 30, 2017 13:13:53 GMT -6
Bore looks pretty scored below the rust line too,,, it's a paper weight as far as I'm concerned,,,, it's amazing to me how people treat their stuff
|
|
Senior Clinician
Currently Offline
Posts: 181
Likes: 2
Joined: Jan 10, 2016 0:49:57 GMT -6
|
Post by thxcuz on Jan 30, 2017 16:17:35 GMT -6
I talked to scrappy dog and they said I should buy the kit for the gy6b 200. With that and the head I'm once again in if for more than I paid for it.
On the upside I'll have a 172cc scoot.
|
|
|
|
Post by cyborg on Feb 2, 2017 20:45:10 GMT -6
At least the parts are very reasonable,,, how's the crank look?,,, drain the oil? Any water in it?
|
|
Senior Clinician
Currently Offline
Posts: 181
Likes: 2
Joined: Jan 10, 2016 0:49:57 GMT -6
|
Post by thxcuz on Feb 6, 2017 15:46:43 GMT -6
Update
Per another forum member who may or may not be in this forum too...I forget,
I an soaking the cylinder in vinegar. The crud seems to be coming off.
I'll clean it, give it a hone and see how it looks.
If it doesn't work I still have the 61mm kit on order
|
|
Doc's Anything Goes
Currently Offline
Posts: 2,739
Likes: 66
Joined: Oct 23, 2010 19:29:21 GMT -6
|
Post by tvnacman on Feb 6, 2017 17:38:36 GMT -6
nice!!!!!!!!!!!!!
John
|
|
Senior Clinician
Currently Offline
Posts: 181
Likes: 2
Joined: Jan 10, 2016 0:49:57 GMT -6
|
Post by thxcuz on Feb 7, 2017 10:33:34 GMT -6
  Off to get it honed. |
|
Senior Clinician
Currently Offline
Posts: 181
Likes: 2
Joined: Jan 10, 2016 0:49:57 GMT -6
|
Post by thxcuz on Feb 7, 2017 11:30:56 GMT -6
I got it honed and the machine shop didn't charge me.
I may have just saved 84 bucks on a bbk
|
|
Doc's Anything Goes
Currently Offline
Posts: 2,739
Likes: 66
Joined: Oct 23, 2010 19:29:21 GMT -6
|
Post by tvnacman on Feb 7, 2017 12:29:49 GMT -6
your welcome
|
|
Senior Clinician
Currently Offline
Posts: 181
Likes: 2
Joined: Jan 10, 2016 0:49:57 GMT -6
|
Post by thxcuz on Feb 7, 2017 12:42:11 GMT -6
Yes, thank you tvnacman.
The guys at the machine never heard of using vinager
|
|
|
|
Post by cyborg on Feb 7, 2017 13:52:23 GMT -6
Nice!!! Good deal,,, I would either had it bored and got a new piston to match or I would have chucked it
|
|
Scooter Doc
Currently Offline
Posts: 553
Likes: 2
Joined: Aug 13, 2011 20:21:06 GMT -6
|
Post by seanstr on Feb 8, 2017 7:40:27 GMT -6
Is it back together yet, running? Results, very interested.
Do one change and check results.
|
|
Senior Clinician
Currently Offline
Posts: 181
Likes: 2
Joined: Jan 10, 2016 0:49:57 GMT -6
|
Post by thxcuz on Feb 8, 2017 8:00:20 GMT -6
Is it back together yet, running? Results, very interested. Do one change and check results. I'm waiting on parts. I need a head and some gaskets |
|
Clinician
Currently Offline
Posts: 10
Likes: 0
Joined: Feb 26, 2017 10:41:19 GMT -6
|
Post by fufsgfen on Feb 26, 2017 12:14:54 GMT -6
With chainsaws they do this:
|
|
