Clinician
Currently Offline
Posts: 10 
Likes: 0
Joined: Mar 17, 2017 9:04:27 GMT -6
|
Post by als78monza on Mar 17, 2017 9:50:26 GMT -6
JUST BOUGHT A 2010 SUNNY 49CC FOR 100.00 ONLY HAS 600 MILES ON IT. THE PROBLEM IS ITS MISSING SOME COMPUTER BORD NEAR FRONT OF MOTOR.IT WILL RUN IF KICKED STARTED BUT HAS NO LIGHTS
|
|
Clinician
Currently Offline
Posts: 10
Likes: 0
Joined: Mar 17, 2017 9:04:27 GMT -6
|
Post by als78monza on Mar 17, 2017 9:55:13 GMT -6
ITS NOT LIKE ANY OTHER SCOOTER WIRING I HAVE SEEN ITS GOT SOME KIND OF COMPUTER SYSTEM ON IT
|
|
|
|
Post by cyborg on Mar 17, 2017 11:18:19 GMT -6
A few different things can cause a no start on the button,,, starter or solinoid,, the button itself could be bad battery could be bad
|
|
Doc's Anything Goes
Currently Offline
Say no to scooter abuse
Posts: 3,873
Likes: 156
Joined: Mar 31, 2010 19:07:16 GMT -6
|
Post by jct842 on Mar 17, 2017 12:05:29 GMT -6
All caps indicate yelling.
Post motor number, it is near kick stand on lower motor case.
Go to our library to find electrical diagram. They are just generic but will be close. There are tutorials there on how to check the stator output. No idea about "missing computer board" near front of motor. You may just have to convert to the old fashioned electronics used in most china scooters. Pictures would help.
|
|
Clinician
Currently Offline
Posts: 10
Likes: 0
Joined: Mar 17, 2017 9:04:27 GMT -6
|
Post by als78monza on Mar 17, 2017 12:54:05 GMT -6
I will post some picsin a little bit
|
|
Clinician
Currently Offline
Posts: 10
Likes: 0
Joined: Mar 17, 2017 9:04:27 GMT -6
|
Post by als78monza on Mar 17, 2017 23:17:51 GMT -6
|
|
Clinician
Currently Offline
Posts: 10
Likes: 0
Joined: Mar 17, 2017 9:04:27 GMT -6
|
Post by als78monza on Mar 17, 2017 23:54:42 GMT -6
|
|
Clinician
Currently Offline
Posts: 10
Likes: 0
Joined: Mar 17, 2017 9:04:27 GMT -6
|
Post by als78monza on Mar 18, 2017 0:07:40 GMT -6
 These are the plugs that would plug into missing component |
|
Doc's Anything Goes
Currently Offline
Say no to scooter abuse
Posts: 3,873
Likes: 156
Joined: Mar 31, 2010 19:07:16 GMT -6
|
Post by jct842 on Mar 18, 2017 9:29:18 GMT -6
Unless you are willing to search out and purchase the missing component here is what I would do.
Go to our library and get a generic start circuit. Those plugs and wires more than likely contain exactly what you need to complete a normal start. trace out those wires. The voltage required comes from the ign sw to brakes to start sw to the solenoid. when brakes are squeezed and start sw pressed should be 12 to solenoid to run starter.
|
|
Clinician
Currently Offline
Posts: 10
Likes: 0
Joined: Mar 17, 2017 9:04:27 GMT -6
|
Post by als78monza on Mar 18, 2017 14:32:29 GMT -6
 I thought they fried that bord because they had a battery pack w/4 12 volt batterys at 48 volts.but the thing in the front with red yellow and blk wires on it must be a converter it had this sticker on it |
|
Clinician
Currently Offline
Posts: 10
Likes: 0
Joined: Mar 17, 2017 9:04:27 GMT -6
|
Post by als78monza on Mar 18, 2017 14:36:19 GMT -6
I think I will have to get standerd wiring and strip out the unnecessary crap
|
|
Doc's Anything Goes
Currently Offline
Say no to scooter abuse
Posts: 3,873
Likes: 156
Joined: Mar 31, 2010 19:07:16 GMT -6
|
Post by jct842 on Mar 18, 2017 16:53:32 GMT -6
A generic start diagram will show what you need to start electrically. You should have all of that on your scooter but not nessicarily hooked up. Trace wires and hook them up as diagram individual ates.
|
|
Clinician
Currently Offline
Posts: 10
Likes: 0
Joined: Mar 17, 2017 9:04:27 GMT -6
|
Post by als78monza on Mar 18, 2017 18:04:52 GMT -6
Have you seen any of these 48 volt sys
|
|
Clinician
Currently Offline
Posts: 10
Likes: 0
Joined: Mar 17, 2017 9:04:27 GMT -6
|
Post by als78monza on Mar 18, 2017 18:49:21 GMT -6
Is it some kind of hybrid
|
|
Doc's Anything Goes
Currently Offline
Say no to scooter abuse
Posts: 3,873
Likes: 156
Joined: Mar 31, 2010 19:07:16 GMT -6
|
Post by jct842 on Mar 18, 2017 20:37:26 GMT -6
Never heard of 48 volt other than if it was an electricaly poweredscooter. If the starter is 48volt it would have to be changed as well as light bulbs and charging system. This will be interesting.
|
|
