Scooter Doc
Currently Offline
Posts: 598
Likes: 25
Joined: Nov 18, 2013 18:09:27 GMT -6
|
Post by twowheeler on Apr 25, 2014 19:02:45 GMT -6
Local guys scooter had the front brake lock up and nearly tossed him. What happened? Seems okay now.
|
|
Doc's Anything Goes
Currently Offline
Say no to scooter abuse
Posts: 3,873
Likes: 156
Joined: Mar 31, 2010 19:07:16 GMT -6
|
Post by jct842 on Apr 25, 2014 20:17:35 GMT -6
does he have the fake abs on it? It would be hard to pin point unless you had more information.
|
|
|
|
Post by cyborg on Apr 25, 2014 21:30:33 GMT -6
caliper seal gone bad,,,spewed a little fluid on the disk? disk warp?,,pad pin come out and pad tipped?caliper bolts tight?disk tight on hub?,,,endless possibilities,,,more info please
|
|
|
|
Post by Bashan on Apr 25, 2014 23:26:33 GMT -6
I had a bike that would nail the front brake on it's own if I was carving a bunch of curves. It turned out the fluid was heating up, expanding, and I had a messed up master cylinder. Replaced the master cylinder and all was cool. Rich
|
|
Doc's Anything Goes
Currently Offline
Posts: 1,226
Likes: 81
Joined: Apr 4, 2014 3:52:42 GMT -6
|
Post by richardv on Apr 26, 2014 7:05:31 GMT -6
Moisture. If it was cold there could have been moisture on the rotor from rain, dew or washing. This can cause the pads to stick. If it was warmed up from driving it could be moisture in the brake fluid and it needs to be flushed out.
Another reason to always wear a helmet. |
|
|
|
Post by jvino on Apr 26, 2014 9:02:18 GMT -6
Yeah I believe you probley cleaned it could cause the problem. I have had close to the same situation happen on my scooter but never locked up on me.
|
|
