|
|
Post by Alleyoop on Jun 26, 2014 16:27:23 GMT -6
All it has to be is a 12v Flasher with the same wires yours is 3. TEST the Flasher switch on your turn signal and test the wires AT THE FLASHER it should be getting voltage. If no voltage then the problem is by the switch or a disconnected power source to the switch, if there is power by the FLASHER then the FLASHER is bad.
Alleyoop
|
|
|
|
Post by heruk on Jun 27, 2014 10:57:43 GMT -6
the only flashers the auto store has are the ones that are three pronged. none with wires. i was wondering how I could splice the harness on to it. Does anyone know exactly what the three wires are for? the three prongs read lamp power and signal.
|
|
|
|
Post by Bashan on Jun 27, 2014 12:13:13 GMT -6
The black goes to lamp power and the grey goes to signal, the green is ground.
|
|
|
|
Post by heruk on Jun 27, 2014 14:57:32 GMT -6
thanks
|
|
|
|
Post by heruk on Jul 3, 2014 17:12:59 GMT -6
Yep it was the flasher. Works fine now
|
|
|
|
Post by Alleyoop on Jul 3, 2014 17:40:29 GMT -6
Fantastic!! Good Job.
Alleyoop
|
|
..BAD TO THE BONE..
