Clinician
Currently Offline
Posts: 15
Likes: 0
Joined: Jun 17, 2014 14:40:02 GMT -6
|
Post by dwint on Mar 3, 2015 19:26:19 GMT -6
when I put my left or right blinker on its fine in the rear butwhen I do my left blinker in the front the right comes on and no blinker on the right.i changed the bulbs around and same thing.i recently had a short in the ignition and front brake switch was fried but the blinker looks fine.what could this be?i hope its not a short
|
|
|
Post by Alleyoop on Mar 3, 2015 19:37:15 GMT -6
What and or how did you fix the IGNITION and BRAKE SWITCH because whatever you did messed the blinkers.
|
|
Clinician
Currently Offline
Posts: 15
Likes: 0
Joined: Jun 17, 2014 14:40:02 GMT -6
|
Post by dwint on Mar 4, 2015 6:21:44 GMT -6
cut each wire and replaced and soldered the ignition.bought a new brake switch but still waiting for it in the mail
|
|
Clinician
Currently Offline
Posts: 15
Likes: 0
Joined: Jun 17, 2014 14:40:02 GMT -6
|
Post by dwint on Mar 4, 2015 10:22:02 GMT -6
you wouldn't believe what I did.last week I bought a new plastic piece for the front.well I had them wired right I just put the directional on the wrong side.i hardly use my blinkers so I never noticed it.thats another one fixed.it was a easy one but I was over looking the obvious
|
|
|
Post by cyborg on Mar 4, 2015 10:40:53 GMT -6
Slow down take your time with repairs and changes,,,, I was the dummy 2 months ago when I did and oil/ filter change on my Stella ,,, to get to the filter the back wheel had to come off,,,, yes you guessed it,,, I put the wheel back on and lightly put the lugnuts on didn't torque them,,, when I got about two miles from my shop it hit me,,,,YOU FUCING IDIOT!!!!!!,,,, 2 had already loosened up to hand tight,,,,,,no disaster but it could have been
|
|