Certified Clinician
Currently Offline
Posts: 56 
Likes: 0
Joined: Sept 28, 2014 15:01:29 GMT -6
|
Cam Question
by: offutt0311 - Apr 21, 2015 12:46:13 GMT -6
via mobile
Post by offutt0311 on Apr 21, 2015 12:46:13 GMT -6
I am looking at doing a cam swap on my Ruckus clone. What is the best street cam? I know there will be some varying answers here, and that's ok. I respect everyone's opinion. Just wanted to get a feel for what's out there and what everyone seems to like. Thanks in advance guys!
|
|
|
|
Post by Alleyoop on Apr 21, 2015 14:25:40 GMT -6
A A8 offers higher top end for scooters. Slightly less lift than the A9 cam. A A9 has best acceleration and top speed. A A10 more low end torque not for top speed. Here is a graph to help you with your choice which would suit your needs for the way you ride and the area you ride in, hilly or flat. Alleyoop  |
|
Certified Clinician
Currently Offline
Posts: 56
Likes: 0
Joined: Sept 28, 2014 15:01:29 GMT -6
|
Cam Question
by: offutt0311 - Apr 21, 2015 15:03:24 GMT -6
via mobile
Post by offutt0311 on Apr 21, 2015 15:03:24 GMT -6
A A8 offers higher top end for scooters. Slightly less lift than the A9 cam. A A9 has best acceleration and top speed. A A10 more low end torque not for top speed. Here is a graph to help you with your choice which would suit your needs for the way you ride and the area you ride in, hilly or flat. Alleyoop Anything i need with the A9 such as valve springs or anything Alley? |
|
|
|
Post by Alleyoop on Apr 21, 2015 15:19:04 GMT -6
No nothing else and the A9 is your best bet. A little tip Before taking eh cam out MARK Bring it up to TDC as if your going to adjust the valves and Make a MARK on the CHAIN aligned with a tooth on the cam Then Line the same tooth on the new cam with the line on the chain that way you will not be off on the timing. Don't forget to Adjust the valves, either both at .004 inchs or you can go .005inchs on the exhaust. Alleyoop  |
|
Certified Clinician
Currently Offline
Posts: 56
Likes: 0
Joined: Sept 28, 2014 15:01:29 GMT -6
|
Cam Question
by: offutt0311 - Apr 21, 2015 16:05:40 GMT -6
via mobile
Post by offutt0311 on Apr 21, 2015 16:05:40 GMT -6
No nothing else and the A9 is your best bet. A little tip Before taking eh cam out MARK Bring it up to TDC as if your going to adjust the valves and Make a MARK on the CHAIN aligned with a tooth on the cam Then Line the same tooth on the new cam with the line on the chain that way you will not be off on the timing. Don't forget to Adjust the valves, either both at .004 inchs or you can go .005inchs on the exhaust. Alleyoop I haven't been on here in forever, but you're the man Alley! Thanks |
|
|
|
Post by cyborg on Apr 21, 2015 18:36:28 GMT -6
Alley is a walking talking thesaurus ,,, sometimes I think he forgot more than the whole forum knows,,, it's kind of spooky,,,,  |
|
..BAD TO THE BONE..
