Senior Clinician
Currently Offline
Posts: 222
Likes: 4
Joined: Mar 26, 2013 16:50:01 GMT -6
|
Post by jjoshua20213 on Sept 2, 2015 16:11:11 GMT -6
What extra has to be done to use a stroker crank. Ive herd things like needing spacers or a longer cam chain? How would I go about getting the items?
|
|
|
|
Post by czmdiver on Sept 2, 2015 18:38:33 GMT -6
What extra has to be done to use a stroker crank. Ive herd things like needing spacers or a longer cam chain? How would I go about getting the items? Depends on how Long ya gunna Strokeher. And who's piston ya gunna use? |
|
Senior Clinician
Currently Offline
Posts: 222
Likes: 4
Joined: Mar 26, 2013 16:50:01 GMT -6
|
Post by jjoshua20213 on Sept 4, 2015 6:46:44 GMT -6
I planned on using the cheap "disposable" kits from ebay to start then get an good kit I plan on keeping. But i'd rather have non stroked crank and have the flexibility to use any part vs. always having clearance issues and having to get curtain parts.
|
|
Doc's Anything Goes
Currently Offline
Posts: 765
Likes: 28
Joined: Apr 2, 2010 6:37:07 GMT -6
|
Post by rapidjim on Sept 4, 2015 7:59:14 GMT -6
In June I built a 139QMB motor using Scrappy Dog"s 44mm stroker crank and their 52mm bore kit and big valve head. I used one extra cylinder base gasket. I did not have any clearance issues at all.
|
|
