Clinician
Currently Offline
Posts: 28 
Likes: 0
Joined: Oct 4, 2015 21:21:23 GMT -6
|
Post by ryanosalien on Oct 4, 2015 21:26:46 GMT -6
Hey,
I own a gy6 150cc scoot and just bought a 30mm pumper carb and in the description it says no vacuum line needed, but in the bottom of the pumper carb the round peice has a port and i dont know what it goes to, it looks like what the cauum port looks like on the side of the stock carb?? any ideas and i know ahead of time this is a dumb question.
|
|
Senior Clinician
Currently Offline
Posts: 225
Likes: 40
Joined: Sept 16, 2013 18:11:26 GMT -6
|
Post by jerryscript on Oct 5, 2015 13:03:36 GMT -6
Pic please, it probably is a re-breather.
|
|
|
|
Post by cyborg on Oct 5, 2015 14:02:34 GMT -6
bowl drain
|
|
|
|
Post by Alleyoop on Oct 5, 2015 14:50:44 GMT -6
If your talking about the Connector on the bottom of the carb bowl that is your CARB DRAIN CONNECTOR. This is a 30mm PUMPER CARB for the 150s, I labled parts on the left side of the carb. Alleyoop  |
|
Clinician
Currently Offline
Posts: 28
Likes: 0
Joined: Oct 4, 2015 21:21:23 GMT -6
|
Post by ryanosalien on Oct 5, 2015 15:51:34 GMT -6
Sorry I looked at it wrong it's on top and it's a accelerator pump it's a denki pd30j carb, you can Google it for a pic and you will see what I'm talking about, sorry for my ignorance
|
|
|
|
Post by Alleyoop on Oct 5, 2015 15:57:44 GMT -6
Little help give me the link to where you bought the carb. There are hundreds of different carbs.
|
|
|
|
Post by Alleyoop on Oct 5, 2015 16:07:08 GMT -6
|
|
Clinician
Currently Offline
Posts: 28
Likes: 0
Joined: Oct 4, 2015 21:21:23 GMT -6
|
Post by ryanosalien on Oct 5, 2015 16:37:16 GMT -6
Yes that's it what the heck does that connect to
|
|
|
|
Post by Alleyoop on Oct 5, 2015 16:42:46 GMT -6
Well First I have to tell you THAT is NOT a PUMPER CARB. That you need to connect to VACUUM what that does is feeds extra fuel when you let go of the throttle so it does not run LEAN and backfire on you.
Alleyoop
|
|
Clinician
Currently Offline
Posts: 28
Likes: 0
Joined: Oct 4, 2015 21:21:23 GMT -6
|
Post by ryanosalien on Oct 5, 2015 16:45:06 GMT -6
I realized it was a pumper carb and corrected myself on the post above and thank for looking
|
|
|
|
Post by Alleyoop on Oct 5, 2015 16:45:05 GMT -6
|
|
..BAD TO THE BONE..
